Detailed Breakdown of the Dexter Single Axle Heavy Duty Suspension Kit Video

Hi Austin, I can help you determine the right replacement double-eye leaf springs for your 2018 Jayco trailer, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your…

Hey Tim yes, the Furrion Chill Cube RV AC w/ Air Distribution Box, Thermostat #FR49TD will work as a replacement for your current 15k Btu AC. You will have to swap everything else out though because this unit is only compatible with Chill Cube…

Hey Les, thanks for reaching out. So, the 18,000 BTU Furrion Chill Cube AC Unit #LC94DX can replace your Coleman Mach AC unit, but you will need to replace your controller, distribution box and thermostat as well. According to Furrion, the Chill Cube…

Hello Julio, thanks for reaching out. The appropriate spring for your trailer will depend on the weight capacity of each axle. Ideally the springs will match the axle capacity. Like for example the 4-Leaf Double-Eye Spring #DX45CR is rated for 2,600…

Hey Steven! I do have a compatible replacement for your Coleman-Mach 15 ducted air conditioner. It is the Furrion Chill HE Replacement RV Air Conditioner for Coleman Setup item #FR32PV. It includes a plug in adapter that will allow you to retain your…

The Dexter Single Axle Heavy Duty Suspension Kit #K71-403-00 uses the Shackle Bolt #007-126-01. The 9/16" portion of this bolt is 2-1/4" long.

We can get you the right shackle kit for your single axle trailer with a Dexter 3,500 lb axle, and you can choose from either a standard kit or an upgrade kit. Either will work, though the Upgrade Kit is going to be the best option due to the fact it…

The Dexter Single Axle Heavy Duty Suspension Kit #K71-403-00 technically will not have a torque specification. However, I have been asked this before and was informed by Dexter that what you need to do is tighten them down to the point of either…

The Dexter Single Axle Heavy Duty Suspension Kit part #K71-403-00 does not come with bushings. These will be required but they should already be installed in the leaf springs and equalizers. If yours need replaced you can use the Suspension Bushing…

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

Yes the 4,000-lb leaf spring is compatible with a 3,500-lb axle. There are a couple of important measurements. Spacing from eye to eye on the spring when unloaded with no weight on the axle. Inner eye diameter of the spring roll Spring width from…

It sounds like you have the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles #e54SR which are 25-1/8". This measurement is taken with the leaf spring relaxed from center of bolt hole to center of bolt hole. With them holding the weight of the…