What to Know About the 2" Hitch Ball Video

When it comes to installing a tow package on your 2013 Mini Cooper The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 1-1/4 inch #EH47FR does not come with a ball mount. When it comes to the draw bar I recommend The Draw-Tite Drawbar for 1-1/4…

For your 2012 Fiat 500, (excluding the Abarth), I recommend the Curt #C11363. This Curt hitch would work great for towing or bike racks or cargo carriers. If you will be doing some towing (check your owner's manual first because the online copy I…

Purely by nature of the way it attaches to the vehicle, a hitch mounted rack would be the most secure. The rack's shank is secured to the receiver tube of the hitch, held in place by a steel hitch pin. The hitch is bolted to the undercarriage of…

I went to our warehouse to get the Tow Ready 2-inch hitch ball #19258. It measures 2-3/4 inches from the bottom base edge of the hitch ball to the top of the hitch ball. I included a short video and diagram for you as well.

You are probably OK but if you are anything like I am it would be too close for comfort. I wouldn't want to take a chance at potentially causing any damage to my fascia. I recommend the Curt Class II Drawbar - 5" Rise - 11-5/8" Long -…

I just spoke with my rep at Draw-Tite the bottom of the 1 1/4" receiver for the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" item #DT74MR sits 5 1/2" off of the ground. I have attached a picture of the…

The two Curt ball mounts you mentioned of part #C45014 and #C45015 are both options that would give you additional rise with the #C45015 being a few inches longer as well than compared to the #C45520 that you have now. Now these options only can be…

My recommendation is to have a custom adapter made for the height and length that you need on your 2010 Chevrolet Malibu with the Draw-Tite Trailer Hitch Receiver #36479. The center of the hitch pin is about 8-1/2" from your rear bumper. Any…

The stop inside the hitch is not to force customers to purchase certain brand products, but to ensure that a Class II draw bar is not inserted into a Class I hitch. The Draw-Tite hitch you have, part #24812, is a Class I hitch so if the welded stop…

The Curt Trailer Hitch Receiver #C98DR for your 2023 Hyundai Ioniq 5 will not reduce your ground clearance since it sits higher than the axle components on your Hyundai. It will affect your departure angle due to hanging below the rear bumper. This…

For a 1-7/8 inch hitch ball to use with the #C45015 or the #C45014 you would want the part #A-80. For a 2 inch hitch ball you would want the part #A-82. Both of these have a 3/4 inch diameter shank that is 2-1/8 inch long.

It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…