Ultimate Overview of the Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers Video

Hitch accessories tend to wobble, especially those that use a 1-1/4 inch to 2 inch adapter. The threaded hitch pin can only do so much to combat the movement. The issue is that the shank of the accessory has to be slightly smaller than the opening…

The Blue Ox Apollo Non-Binding Tow Bar #BX7470 is going to be the largest size we have to fit a 2-1/2" receiver. So you will at least need a 3" to 2-1/2" Adapter #C85JR. This will connect to the Base Plate #C56JR on your 2020 Ford…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I recommend using the Roadmaster Tow Bar to Blue Ox Brackets Adapter #RM-031 as it is specifically designed for your Roadmaster Falcon Tow Bar #RM-522. This will ensure there are no warranty issues that may be denied on your tow bars and that the…

I cannot locate an order for the etrailer Replacement Tow Bar Adapter Kit #e98978, but I do see that you have the etrailer XHD Non-Binding Tow Bar for Blue Ox Base Plates #e67ZR which already includes the Tow Bar Adapter Kit #e98978 installed. Not…

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

According to the online version of the owner's manual for your 2010 Honda Fit that we found you will need to remove the Radio fuse from the interior fuse block which is in the 61 position. This is where you will want to install the Roadmaster…

Yes, there is a way to secure the accessories to the Yakima EXO Swing Away Cargo Carrier item #Y72VR. The Swing Away base has Yakima's Same Key System (SKS) locks built in that secures the accessories to the base. These cores are included but can…

I have just what you need, a stainless steel locking anti-rattle hitch pin for you. I suggest the Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches part #SR25219. You will need a hollow shank for this to work. For a…

Just to make sure we are accurate on the actual rise you may need, lets cover some basics. With the tow vehicle parked on level ground, measure from the ground to the top of your hitch receiver opening. Then, with the trailer level, measure from the…

The ride on the back of a trailer is very rough due to the extended distance from the axle so a lot of hitch mounted accessories like the Flint Hill Goods 30x50 Wheelchair Carrier part #FHG99ZR are not rated for this. Instead, I recommend using the…

We have just what you're looking for with the Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers #GY88XR. The sleeve acts as a wedge to take out play between your hitch receiver and extender. Although it does not not require a wrench and a…