bing tracking image

Draw-Tite Front Mount Trailer Hitch License Plate Relocation Bracket Review

content loading

Customers compare 5443 to these similar products

Products Featured in this Video

Review of the Draw-Tite Front Mount Trailer Hitch License Plate Relocation Bracket

All right today, we're going to show you part number 5443. This is the license holder. Now our licence plate holder, is designed to work with instances where your front mount hitch actually goes into place where your licence is. Some vehicles licence plate can be ran down towards the bottom of the bumper, but in certain cases you just have nowhere else to go with it, so this is why we have this part. Pretty simple, it's a plate that holds your licence plate. It has all the hardware needed to attach your licence plate to it. This just basically goes into your front mount hitch when you don't have any other accessories in it.

We'll into some of the features. First off it has stainless steel bolts, then plated nuts and washers. These are nylon lock nuts. Licence plate holder its self is powder coated and if you flip it over and take a look at the part that goes inside the front mount hitch, we have 2 holes for adjustment, which uses a 5/8 inch hitch pin or a locking pin. Let's go ahead and put a licence plate on there and try it out. We actually have a loop of tape on here to help hold it in place for us while we put on our hardware.

Bolt, flat washer, and then a lock nut. Now its a good idea to actually have a flat washer on an oval here too, but we're not working with something that's really structural, so I think we'll be okay. The tools we need to tighten down the hardware will be a 1/2 inch socket and a wrench. Go ahead and put in our front mount hitch, and let's go ahead and line it up with our holes. We'll go ahead and try to run it all the way in if we can, if not we have an extra set of holes. Put your favorite locking pin in place, we're good to go. That'll finish it for part number 5443.

The front mount licence plate relocation bracket.

Info for this part was:

Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.