bing tracking image

Hopkins Graduated RV Levels Review

content loading

Customers compare HM08525 to these similar products




Products Featured in this Video



Reivew of the Hopkins Graduated RV Levels


Today, we'll be taking a look at the Hopkins Stick-on Graduated RV Level, part number HM08525. The Hopkins Graduated Level is a great solution for leveling out your camper or RV. It features an elongated arch reflective bubble level with numerical markings that indicate, in inches, how far you need to raise or lower your trailer. The kit comes with two levels, so you can easily level out your front-to-back and side-to-side. They measure three and three quarter inches long by an inch and a half tall. Now that we've gone over some of the features of the level, I'll go ahead and show you how to get it installed. Now first thing we need to do is make sure that our trailer is level front-to-back and side-to-side.

Here on the side of our trailer, we'll need to find a fixed point. We're going to off the top of our trim right here with our carpenter's level. As you can see, we're slightly out of level front-to-back, and we're going to have a buddy go up front and lower our trailer. Yup, that's good. With the front-to-back taken care of we're going to go ahead level out our side-to-side.

We're going to come up here to the A-frame of our trailer. Now, with the level on our A-frame, you can see that our side-to-side is slightly out of level. We'll go ahead and have a buddy adjust our stabilizers. Little bit more. There it is. Now, with our camper level, we can go ahead and stick on our new Hopkins Graduated Level.

First thing we want to do is make sure that our area is nice and clean so our adhesive gets a good grip. I've already gone ahead and removed the adhesive strip on the back, so we'll just need to place it nice and slow and make sure the bubble remains center with the zero and then, we can stick it on. Now, it doesn't rightly matter where you stick it on your camper just as long as you know that it's level. And we've got it. Now that our front-to-back level on, we can go ahead and grab our next one, and this is going to be our side-to-side. First thing we need to do, like before, we'll need to go ahead and wipe that down.

Make sure it's clear of any dust or debris, that way our adhesive gets a good grip. Same thing as before, just make sure it's in with the zero . or lined up with the zero rather. All right, that looks pretty good. Now, if you'd like a more permanent mount for your level, we've got two optional screw holes that you can use. You'll just have to provide your own hardware. That's going to complete our look at the Hopkins Stick-on Graduated RV Level, part number HM08525. .


Info for this part was:

Employee Dustin K
Video by:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Hayden R
Installed by:
Hayden R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.