bing tracking image

Loctite Silicone Gasket Maker Review

content loading

Customers compare LT37467 to these similar products

Products Featured in this Video

Review of the Loctite Silicone Gasket Maker

Today we're going to review the Lock Tite RTV high-performance silicone gasket maker, part number LT37467. The tube is a total of 2.7 fluid ounces. Once applied it becomes tack free while it cures in about 30 minutes. Full cure time is 24 hours. Temperature range of this gasket maker is -75 degrees Fahrenheit to 625 degrees Fahrenheit, making it optimal use for automotive type needs. Whether it's engine valve covers, oil pans, or timing covers, or simply sealing up here in our spare tire well. Let's go ahead and apply some here to create a gasket or sealant between the block and the spare tire well.

This will help prevent any outside moisture, debris, dirt from getting into the spare tire well by sealing it up. It's also a good safety precaution just to make sure we keep any exhaust gases out of the interior or cabin of the vehicle. We can see how pliable it is when its super wet, when it just comes out of the tube. We'll wait for it to tack up and install it. Just after about 30 minutes you can see that the outer film, or shell, on our ATV is tacked up enough that it won't stick to my finger yet it's still pliable while it cures.

Go ahead and put it into place. That will do it for the look at the Lock Tite RTV high-performance silicone gasket maker, part number LT37467.

Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Nicholas E
Test Fit:
Nicholas E
Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.