Malone Watersport Carriers Review - 2015 Kia Sorento Video

The Malone DownLoader Kayak Carrier and TelosXL Load Assist w/ Tie-Downs part #MPG114MD-351XL will fit and work well on your 2020 GMC Acadia with GMC roof rack cross bars. The DownLoader load assist basically allows you to walk the kayaks up the side…

For your 2013 Honda Odyssey, I recommend two of the Malone DownLoader, part #MPG114MD. This J-Style Rack will help you load the kayak up onto the vehicle with the integrated ramps, helping to support some of the weight. The J-loader also includes a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Jimmy! It looks like the Vantage Mobility Northstar Packages don't alter the rear end of the 2015 Honda Odysseys. You will want to confirm this because all of our available hitches are set up for unaltered factory set ups. If this is the…

From what little I was able to learn about the VelociRAX 5 bike rack on their website, the rack is compatible with a 2 inch hitch that has a tongue weight capacity of at least 500 lbs, and the Draw-Tite #75270 Class III hitch meets both those…

The bolts that come with the Draw Tite hitch part #36417 are size M12 X 1.25 X 35mm CL8.8 Bolt. The size thread tap you'd need is M12x1.25mm. I attached a few help articles on tapping threads for you to check out as well.

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75282 requires all hardware be torqued to 68 foot pounds according to the instructions. I've attached a photo in case you need anything else for this installation…