A Closer Look at the MaxxAir FanMate RV and Trailer Roof Vent Cover Video

I spoke with my contact at MaxxAir regarding the MaxxAir 2 Vent Covers like the Smoke #MA00-933073 that you were looking at and the Standard Covers like #MA00-933067. He said there are two primary differences between the two models. The first is that…

We certainly do, it's available in black as part #MA00-955002 or smoke as part #MA00-955003. Both are compatible with the #MA00-04500K MaxxFan Plus RV roof vent you'd looked at. You might also be intereste in the #MA00-955202 bug screen to…

Yes, the correct replacement lid cover for your MaxxFan Plus Roof Vent w/ 12V Fan part #MA00-04500K (4951KS) is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K.

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

The MaxxAir FanMate Rain Cover in Black #MA00-955002, smoke #MA00-955003, or white #MA00-955001 are confirmed to fit the rounded factory mounting points like you see on the attached photo. If you have the flat mounting anchor points like in the other…

Hello Ron, thanks for reaching out. The tallest vent cover we offer from MaxxAir is the MaxxAir FanMate RV and Trailer Roof Vent Cover #MA00-955002. This cover is 10-1/4" tall x 26-1/2" long x 18-1/8" wide and is designed to work with…

Great question Tim, so the MORryde sliding cargo tray part #MR46FR that you referenced has an 800 lb weight capacity and weighs 144 lbs.

We do offer a cover that will keep snow from getting on the lid of your MaxxAir MaxxFan Deluxe Roof Vent #MA00-07500K. You will need the MaxxAir FanMate RV and Trailer Roof Vent Cover #MA00-955002.

The MaxxAir FanMate vent cover Item #MA00-955001 is going to be just a little taller but the louvred end tapers in and it does not come with the screen which is Item #MA00-955202. 25" long x 18-1/8" wide x 10-1/4" tall. The MaxxAir II…

No the MAXX AIR II Vent Cover #MA86JR that you referenced does not come with a bug screen built into it. Just the screen is not available as it does not separate.

The MaxxAir FanMate RV and Trailer Roof Vent Cover #MA00-955002 will fit your MaxxAir 00-04900K, but it will not allow the lid to fully open. This is a clearance issue that is the same for every other RV roof vent on the market. Manufacturers will…

We have the MaxxAir roof vent part #MA00-04500K. It has a remote control, thermostat, and rain sensor that will automatically lower the lid when it rains. You'll have to reopen it when the rain stops as the rain sensor is covered by the lid and…