All About the MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension Video

Hello Julio, thanks for reaching out. The appropriate spring for your trailer will depend on the weight capacity of each axle. Ideally the springs will match the axle capacity. Like for example the 4-Leaf Double-Eye Spring #DX45CR is rated for 2,600…

The correct crossmember support depends on the suspension you have on your 2015 27.5 ft. Jayco 5th wheel. Unfortunately that is not information we have, so you will need to take a look at your suspension to pick the correct option. I have listed the…

Yes, you can replace your current Lippert Equa-Flex equalizers with the MORryde AllTrek 4000 Equalizers #MR29DR on your 2018 Highland Open Range. The yellow octagons on the front and rear are a for correcting the alignment of the axles and are not…

Since the MORryde AllTrek 4000 Equalizers #MR29DR sits inside the middle hanger like a standard equalizer you'd want to use the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR. This crossmember will use your wet bolt and come with…

The MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers #MR29DR are the new upgrade to their counterpart - the MORryde Premium Rubber Suspension Kit for Tandem Axle Trailers MR47ZR. According to MORryde, the AllTrek has been through more intense…

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

I reached out to MORryde for you and obtained the information that you requested for the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications part #MR43WR. I assume you're trying to clear some sort of drain line and if that's…

Outstanding, thanks so much for the photos, they were really helpful. What it shows is that your 2022 Keystone Cougar 30BHS travel trailer does have stock suspension with a standard equalizer, and we do have the correct X-Factor Crossmember for you,…

Hello Darren. Thanks for reaching out, I can definitely help with this. To convert your 2024 Brinkley Z2900 5th wheel over to disc brakes, you will need a disc brake kit, a brake line kit, and electric over hydraulic actuator, and a breakaway kit for…

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

The MORryde X-Factor Dropdown Crossmember for Stock Leaf Spring Suspension item #MR84AR is going to shore up and support your Toy Hauler's frame like a sway bar on a vehicle. It will keep your trailer's suspension from buckling when making…

The MORryde X-Factor Crossmember part #MR33WR attaches to the leaf spring hangers which are located in-between and in the front and rear of each axle. I have attached a photo below to clarify. Therefore, you'll need three for full support on a…