bing tracking image

Optronics LED RV Interior Light Review

content loading

Customers compare RVILL33 to these similar products

Products Featured in this Video

Review of the Optronics LED RV Interior Light

Today in our camper we will be replacing the old incandescent lights with our new Optronics LED RV interior light. Part number RVILL33. Now we're here above our sink with our old incandescent light on, just to give you an idea of what it looks like. This is what it looks like with our new Optronics LED light installed. The Optronics LED light is the perfect replacement for you RV or camper's old incandescent lights. It features nine super bright, long-lasting LEDs with no bulbs to replace. It features a four hundred and seven effective lumen output.

Optronics offers a lifetime warranty on the LEDs themselves. Now that we've gone over some of the features I'll go ahead and show you how we got it installed. Now for safety you want to make sure that your RV is powered down. Let's go ahead and remove the lens. Drop that down it's going to reveal our mounting locations. You can take our screws out.

We'll want to make sure and set those screws aside because we're going to use that same hardware again. We'll drop it down. Let's go ahead and reveal our wires a little bit here. As you can see we've got some wire nuts. We're just going to be reusing the wire nuts but you can also use butt connectors.

That's going to be part number 05732-2. We'll just unscrew that. Remove the wire. Pull that aside for now. All right. We'll grab our new LED light and the wires are pretty stripped so we can just remove off the rubber there.

The black is going to connect to our power, which is our orange and white. Go ahead and do that first. We're just going to screw that right back in place the way it was before. Now with that in place, let's go ahead and check make sure it works first before we put it up there. All right, so the camper is powered up. Let's check it. Perfect. Now we can go ahead and remove our lens. It doesn't require any tools to do so, so you don't want to try and pry it off. All you need to do is apply a little bit of pressure and slide outward. Just like that. Now we can feed our wire back up. Place our light where we had it. Then we can run our screws through. Now we can replace our lens. Then we've got it. That's going to complete our look and install of the Optronics LED RV interior light. Part number RVILL33.

Info for this part was:

Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.