Customers compare PH54FR to these similar products
Products Featured in this Video
Ryan: Hey everybody, my name's Ryan and here at etrailer, we install, test fit and review a lot of different parts, that way we can try to answer any questions those of you might have. And that's exactly what we're doing here today. We're going to be checking out the Patriot Hitches Adjustable Drop Hitch Receiver Adapter.So today we have the Red Ops… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hey Robert, I spoke with both Ryan and Jake (installers here at etrailer) since they've both installed the Demco Tabless Base Plate Kit #DM77YV. Both Brad and Jake stated it's tough on the Mavericks and that they either drilled a self-tapping…
view full answer...If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…
view full answer...Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…
view full answer...The Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH67SR in the 7,000lb capacity is the only capacity we currently carry. For 10,000lbs from Patriot Hitches we have their Captain #PH34FR. We do have the Gen-Y Shank #325-GH-304 rated for…
view full answer...I have the perfect solution for you! The Patriot Hitches Adjustable Drop Hitch #PH67SR will be exactly what you need. This will fit your 2" receiver and can be adjusted to rise or drop 2-1/2" up to 11". This is going to be your best…
view full answer...Hey Ralph, thanks for reaching out! Yes, the Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH67SR can be used to flat tow your Jeep Wrangler using a Blue O tow bar.
view full answer...Yes, the Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH67SR will work with your motorcycle carrier. This assembly is rated for up to 700lbs of tongue weight which is below the 600lbs you mentioned having with your current carrier. Since…
view full answer...I have a single motorcycle carrier for my KX450. Between my bike and the carrier their dead weight is about 315lbs, but my tongue weight is more than that since the bike sits farther out from the hitch receiver. With bumps and hills on the road that…
view full answer...The reason is pretty simple. The Blue Ox #BX88132 is specifically designed for flat towing and has been rigorously tested for that purpose. The Patriot Hitch #PH54FR adjustable drop receiver adapter has NOT been tested for flat towing a vehicle,…
view full answer...We have verified with Patriot Hitches that there are not different towing capacities and tongue weights based on the rise or drop of the Adjustable Drop Hitch Receiver Adapter #PH54FR. No matter which rise or drop position the hitch is, it has a…
view full answer...The Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH67SR will not reduce the capacity for your 2021 Promaster City with a class III receiver.
view full answer...The etrailer Ball Mount w/ Pre-Torqued 2-5/16" Ball - 2" Hitch - 2" Drop #e27DR is going to be just as good of quality as Draw-Tite or Curt ball mounts, but it does have a few benefits that stand out compared to other options. The…
view full answer...