A Closer Look at the Powerbuilt Bottle Jack Video

Hey Russell, thanks for reaching out! Sounds like you're needing the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches #e98881, which has a keyed alike option on the product page and is made in the USA. Just change the option to…

You'd need a high capacity bottle jack like the Powerbuilt part #ALL647501 which has a 24,000 lb capacity. You'd also want a 4-way wrench for installing and removing the lug nuts. If you need a spare wheel and tire let me know what tire size…

The Powerbuilt Bottle Jack #ALL647501 that you referenced weighs 14 lbs and has a 24,000 lb weight capacity.

The Curt Spare Tire carrier part #C31006 will carry a 19-1/2 inch spare tire. We had a customer write us a review for this product and said that it worked well carrying his 19-1/2 inch spare. As long as you aren't exceeding the capacity of your…

We've had a few customers come back and tell us that Grade 8 1/2 inch diameter bolts, nuts, and washers worked great to mount their spare to the Curt spare carrier part #C31006.

The Curt Trailer Hitch Mounted Spare Tire Carrier #c31006 does have a bit of an angle, you're right, but I can't recommend using any type of shim or adapter to change the angle. That said, the angle isn't extreme, as you can see by the…

I spoke with my contact at CURT Manufacturing about hitch mounted spare tire carrier #C31006, and he stated that it will hold your 85lb spare, provided that the trailer hitch itself is also capable of supporting the combined weight of the spare and…

There is not a set weight limit for this Curt Trailer Hitch Mounted Spare Tire Carrier, part #C31006. As long as the hitch that is on your Class A Monaco Monarch Motor Home has tongue weight capacities that are above the weight of the carrier and…

We have two front mount receivers available for a 2004 F-450 cab and chassis. They are Draw-Tite part #65022 and Curt part #31114. I have added links to these parts and their install instructions below. I did some geometry with your 8 on 9 inch lug…

For a great jack to change a spare tire, I recommend the Powerbuilt Bottle Jack #ALL647501. This jack comes with a massive 24,000 pound weight capacity, so you don't have to worry about exceeding that limit. As far as lift height, it extends from…

With an odd number wheel bolt pattern, like the Loadstar ST205/75D15 Bias Trailer Tire #AM32253DX, the measurement is slightly different. You would measure from the center of one bolt hole over to the outside edge of the one of the two bolt holes…

The main reasons why trailer tires blow out is heat generated from under inflated tires and overloading the tires. Trailer tires should be inflated to the maximum psi indicated on the tire. A tire in the same size but with a higher ply rating would…