bing tracking image

Roadmaster 12 Volt Outlet Kit Review

content loading

Customers compare RM-9332 to these similar products




Products Featured in this Video



Review of the Roadmaster 12 Volt Outlet Kit


Speaker 1: Today, you'll be having a look at the Roadmaster 12 Volt Outlet Kit. Part number: RM-9332. This is great for supplemental breaking systems that need to have a constant source of power, such as ones that are portable that you plug in and remove from the car, and you can swap between vehicles. Those typically need a 12 volt outlet in order to work properly. A lot of vehicles out there such as this one, when the key is not in the ignition the factory power outlet doesn't have any power going to it, so you won't be able to use it properly when your vehicles in tow mode.Our 12 volt outlet, has a built-in fuse holder in the wiring harness. It already has a fuse pre installed.

This is great so if you have an overload situation, you don't want to worry about your wires getting overheated and potentially causing electrical fire. The fuse will blow, protecting your device and your vehicle.We have a 20 amp fuse inside of our fuse holder. What that will allow us to do is plug in most accessories that are rated for up to 20 amps. So we don't have to worry about not having enough power in order to run them properly.We have a five foot wiring harness from the end of the outlet to our fuse holder, and our negative side of the terminal is, this gives us adequate distance to get to either a fuse box or a vehicle's battery.The kit comes with a mounting bracket so we can locate our socket and any location, which is convenient for us. It comes with three self-tapping screws, one which you can use for your ground, and two to mount the bracket.

The kit also comes with a fuse tap, where you can insert into your fuse box and power the positive side of the fuse holder. This is optional to use, it just depends on which application you like to use. You can go in your fuse box, or go directly to your battery, whichever way you prefer to do it.That completes your look at the Roadmaster 12 Volt Outlet Kit. Part number: RM-9332.


Questions and Comments about this Video

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Andrew S
Test Fit:
Andrew S
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Alan C
Video by:
Alan C
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob H
Video by:
Jacob H
Employee Aidan B
Video by:
Aidan B
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.