Detailed Breakdown of the Roadmaster High-Low Adapter for Tow Bars Video

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

It sounds like you are looking for the Add-On Receiver for Blue Ox Adjustable 2" Drop Hitch Receiver item #BLU94TR. This will work with the Blue Ox Adjustable Drop Hitch Receiver Adapter item #BLU28XR you were looking at.

The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches #UWS65XR is 20-1/2" x 48 1-/2". As far as a floor, there is not a traditional floor but there are strips of aluminum that line the bottom vertically…

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…

I do have an option for you but most factory motorhome trailer hitches have a maximum capacity of 5,000 lbs. If you have a larger vehicle that you need to tow, this will have to be replaced. I don't have a bolt-on option for you but still an…

We offer two adjustable-width frame-mount hitches for your Winnebago that has a 31-inch frame spread. Curt 2-inch hitch #13703 can be bolted or welded on a frame from 22- to 72-inches wide. It offers a 350-lb tongue weight capacity. This item fits on…

You picked out some great parts so we'll go through each to ensure they're right for your 2023 Ford Ranger. The Blue Ox Base Plate Kit #BLU77XR and Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar for Blue Ox Base Plates #RM-677 are a…

Hello Phil. So, yes, the tow bar being out of level can definitely cause the arms to not lock, among other problems. Anything greater than 3" out of level is not recommended for this reason. Fortunately, it sounds like nothing on your etrailer…

The Roadmaster High-Low Adapter for Tow Bars #RM-076 that you referenced would be perfectly for what you need. It will give you the 6 inches of drop and will also extend the ball mount out an additional 10-1/4 inches.

The length of the lower bar, pin hole to pin hole, is 10 inches.

The Blue Ox High-Low Adapter for Tow Bars #BX88235 is designed for lateral pulling like what we see with a flat-tow setup since the towed vehicle is supported on all 4 wheels. For your application I recommend using the Replacement Shank for Gen-Y…

Hey Jeff, did you try moving the flat tow setup and applying the brakes? The Blue Ox Patriot #BLU37FR has an inertia sensor that detects how hard you apply the brakes and decides how hard to apply the flat towed vehicle brakes so if you didn't…