SureCan Utility Jug Feature Review Video

The weight of the B&W Tow & Stow 3-Ball Mount #BWTS20049B that you referenced is 31 lbs. I attached a review video for this for you to check out as well.

We haven't tested using an Ark Articulating Coupler #AR44FR with a Curt Adjustable ball mount like the #C45902 and I don't think this is going to work because of the limited clearance from the hitch ball to the channel. You'll instead…

The Curt Adjustable 2-Ball Mount #C45902 that you referenced has a shipping weight of 38 lbs. If we take away a few lbs for shipping weight that leaves us with about 35 lbs.

The Curt Adjustable 2-Ball Mount #C45902 is manufactured overseas. If you are looking for a similar made in the USA adjustable ball mount the Flash Solid Steel HD Adjustable 2-Ball Mount #FA49-00-5625 has the same 2-1/2" receiver, 6" drop,…

I'd go with the adjustable pintle hook mount part #63072 and then mount the mount the hook/ball part #C48200 to the adjustable platform so that you can tow the military trailer you have with the lunette ring but then also be able to tow a trailer…

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 15K #C45949-22516 does have the ability to utilize a pintle hitch. The Curt Pintle Mount Attachment for Rebellion XD Adjustable Ball Mount #C79FR can be…

If using a pintle hook combo such as #C48200 and coupling to the ball then the latch part would not be able to come down far enough to insert the pin to hold it in place which is fine because the coupler locks onto the ball. Looking through the other…

Fastway has an all black adjustable ball mount that fits 2-1/2 inch hitches and has 6 inches of drop with the part #FA49-00-5625. Fastway is made by same company as #DTALBM6625-2S as well. Or for a totally black version of a similar ball mount we…

To adapt your 2-1/2" receiver to accept your 2" bike rack you will want to use the B&W Hitch Receiver Reducer Sleeve item #BWRHXA2182. This reducer sleeve slides directly into your 2-1/2" receiver and does not extend past it by…

Since you have such a light boat trailer I recommend the Curt Rebellion XD #C83WR. This will work better with the lighter amount of tongue weight that you have of 400lbs. The hitch will also be much easier to use for you as it weighs only 43lbs…

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount part #C83WR won't work with a weight distribution system due to the design of the adjustable shank but we do have a very similar option that will, the Gen-Y Torsion Weight Distribution…

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount part #C45949-2516 is an excellent option for towing as it has built-in cushioning which does a great job of absorbing road shock thereby proving a smoother ride. In regards to weight…