bing tracking image

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers Review

content loading

Customers compare 3024-P to these similar products




Products Featured in this Video



Review of the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers


Speaker 1: We're gonna be taking a lot at and installing part number 3024-P, which is a Tekonsha adapter for electric brake controllers. We're going to be installing this in conjunction with the Tekonsha prodigy P3 trailer brake controller, part number 90195.Now, our adapter harness here is going to make wiring up our brake controllers much easier. All we're gonna have to do is plug into the existing port underneath our dash, and then plug this into our brake controller. Now, it's going to work with several different kinds of brake controllers, whether it be a time-activated brake controller, or a proportional brake controller, this adapter is going to make our life much easier when installing, and we're not going to have to run wires all the way from the back of our vehicle with the seven-way, all the way up front.Now, we're gonna need to go underneath our dash to find our factory port. Now, it's gonna be on the driver's side, underneath the right hand side of our dash. So if we come to our gas pedal and go straight up, we're gonna be looking for a port or a plug that looks similar to this, but it's gonna be the opposite.

It's gonna fit inside of here, and it's gonna be a four prong plug.Now, if we reach up and pull down, we're gonna have two plugs. Now, this white one with the four prongs is gonna be the one we want, but it is taped to this other plug, just for reference so you know where we're at.Now we can take our harness, we can take the plug, and we're gonna insert it until it locks into place. Now we're gonna take the other end and we're gonna plug it into our brake controller. Now all we have left, is to tuck up our wires under our dash and secure them so they don't get in the way or obstruct our pedals.With everything tucked up and our trailer hooked up, we're ready to hit the road. And that'll finish up our look at the Tekonsha plug in wiring adapter, for electric brake controllers..


Questions and Comments about this Video


Steve N.
Wow, that looks easier than I thought it would be. Good video.

Info for this part was:

Employee Joshua S
Video by:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Jared G
Test Fit:
Jared G
Employee Andrew S
Test Fit:
Andrew S
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.