bing tracking image

Yakima LongHaul 4 Bike Rack Review

content loading

Customers compare y02476 to these similar products




Products Featured in this Video



Review of the Yakima LongHaul 4 Bike Rack


Today we're going to be taking a look at the Yakima Long Haul Hanging Style 4 Bike Rack for 2" hitches. Now this is going to be for RVs, travel trailers, and motor homes. Part number Y02476. The Yakima Long Haul is specifically designed for RVs, motor homes, or travel trailers. It's heavy duty, and because it has limited moving parts it's going to be more stable here at the rear of your recreational vehicle. It's not just for RVs. You can use it on any vehicle with a 2" receiver.

I've gone ahead and removed a few bikes so we can take a closer look. It secures our bikes with three points of contact. We've got two zip strips for our top tube, and then one for our seat post tube. This one's going to be our anti-sway. It's going to help prevent sway in our bike when we're on the road, as well as prevent bike-to-bike contact, and bike-to-vehicle contact. Both our zip strips and our cradles have super-cush padding.

It's going to offer a nice ride for our bikes. When not in use our dual arms fold down for more clearance here at the rear of our RV. Simply press in on the lever, guide it down until it snaps into place. The whole thing is made out of a sturdy steel construction with a chip resistant silver powder-coated finish. It's full welded here at the bottom, and since it's powder-coated it's going to resist rust and corrosion. The included anti-rattle bolt is going to help reduce all the play and all the rattle between our receiver and our bike rack.

The lock is also included, and it uses the same key system as our cable lock up top. That cable lock is just integrated here at the back, and two keys are included. It has a weight capacity of 37-1/2 pound per bike, and it features a limited lifetime warranty. Now that we've gone over some of the features I'll go ahead and show you how to get it installed. First thing we'll do is load our shank in and line up our pinholes. Now this is going to be done the same way whether installing it on an RV or a vehicle.

Once we've got our pinholes aligned we'll take our included anti-rattle bolt, we're going to thread that through on the passenger side. Once we get it hand tightened we can grab a wrench and tighten it down the rest of the way. Now the size is just going to be 15/16. Get that nice and secure. I'll take my lock, and put it on the other side, and lock it up. Then I'll just put on my dust cap and we're all set. In preparation for loading up our bikes we'll need to raise up the dual arms. To do that we've got a gray lever up top, just swing up until it snaps in. Now let's remove our zip strips. To do that, squeeze in on the two tabs, and they come on out. Now it's going to be way easier to load your bike up if you fold the anti-sway cradle up out of the way. So that's just what we'll do. Now it's recommended that you load up the heaviest bike first, so we'll grab out mountain bike and we'll just work our way on towards the front. Now we want to make sure that our seat post tube is nice and snug up against our anti-sway cradle. Then we'll just go ahead and replace our zip strips. Then we can just do our top two zip strips and we'll repeat the process with our remaining bikes. Some bikes such as women's, children's, and bikes with alternative frame styles may need a bike adaptor bar to sit evenly on the cradles. Yakima makes one, it's called the Yakima Tube Top. That's part number Y02531. With all of our bikes loaded up Yakima's provided us with two straps. If we we're just carrying one bike with us, the smaller strap holds our front wheel in place and prevents it from spinning. Since we've got all the bikes loaded up we're going to use our larger strap, and we'll show you how to run that. We'll start by putting it through our wheels and working our way towards the back. Then we want to be sure to go around our mast, and then we'll just go back out through our wheels. Then we'll just connect it to our buckle and pull it tight. This is going to prevent our wheels from spinning, and prevent our bikes from swaying at high speeds. Last thing we'll do is run our cable lock. It's integrated within the mast, so we'll just pull it all the way out, then we'll go over the top of our bikes, and then just snap it in. With all of our bikes loaded up and secure let's go ahead and take it out on our test course and see how it performs. Here on our test course let's first go into our slalom. This is going to show side-to-side action such as going around corners, or evasive maneuvering. Then onto our solid speed bumps. This is going to show and up and down action, such as pulling in and out of a garage or a parking lot. Then finally onto our alternating speed bumps. This is going to show a twisting action such as going over pot holes or uneven pavement. That's going to complete our look at the Yakima Long Haul Hanging Style 4 Bike Rack for 2" hitches, part number Y02476.


Info for this part was:

Employee Zack K
Test Fit:
Zack K
Employee Colin H
Test Fit:
Colin H
Employee Carla M
Test Fit:
Carla M
Employee Hayden R
Test Fit:
Hayden R
Employee Savanna B
Test Fit:
Savanna B
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Jacob H
Test Fit:
Jacob H
Employee Ryan G
Test Fit:
Ryan G
Employee Robert O
Test Fit:
Robert O
Employee Evangeline M
Test Fit:
Evangeline M
Employee Andrew K
Video by:
Andrew K
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Aidan B
Video by:
Aidan B
Employee John S
Video by:
John S
Employee Thomas T
Video by:
Thomas T
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.