bing tracking image

Yakima Trunk Bike Racks Review - 2015 Dodge Dart

content loading

Customers compare Y02634 to these similar products




Products Featured in this Video



Review of the Yakima Trunk Bike Racks on a 2015 Dodge Dart


Today on this 2015 Dodge Dart we're going to be taking a look at the Yakima fullback 2 bike rack, part number Y02634. We already have a bike installed on the rack. Let's go ahead and take a closer look and show off some of the features. How the bike actually attaches to the rack, you're going to have 3 points of contact with the bike's frame. We're going to have 2 zip strips up at the top here and then 1 off to the side here. Which, is going to act as and anti sway strap to keep the bike from moving too far back and forth possibly hitting the bike rack or the bike's in front of it. Also, at the front we have this integrated cable lock, which you'll wrap around the bike in the front and attach it to this point here for some additional security.

Let's go ahead and take the bike off and set it aside. To do that on either side of the zip strip you'll have 2 tabs. You simply push those in at the same time and lift the zip strips out. We'll take the bike, lift it up and off. I'm going to go ahead and put the zip strips back into place so we don't lose them. All right, with the bike rack in this position measuring from the bumper you've added about 30 inches to the rear of the vehicle.

Now, for close quarters situations such as, parking or if you just need a little bit more space you go to these gray dials here, pull up holding on to them while you do so and you can pull them down. Now, with the bike rack in this position again measuring from the bumper, now we've only added about 10 inches. Now, how this actually attaches to your vehicle. We're going to have 4 points of contact. We're going to have 2 rubber coated hooks up at the top marked as so, so you know which is which. Then we'll have 2 straps at the bottom right where the trunk meets the bumper.

We'll also have a padded portion here against the trunk. As well as the top so we make sure we don't scratch up the vehicle once we get this installed. Now, on the back side here, there is a fit dial. It's kind of hard to see the numbers, but when you adjust it for your vehicle, for this particular vehicle, it's going to be adjusted to the level 2. You want to double check with your instructions just to be sure.

There you have it for the Yakima fullback 2 bike rack, part number Y02634 on our 2015 Dodge Dart. First we'll take it onto our slalom course. This will show you the side to side action. Such as, making turns or evasive maneuvers. Now, we're at the alternating speed bumps. This will show you how it looks driving on uneven pavement or potholes. Finally, we're at the solid speed bumps. Which, simulates going into your driveway or parking lots.


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee John S
Video by:
John S
Employee Colin H
Test Fit:
Colin H
Employee Hayden R
Test Fit:
Hayden R
Employee Savanna B
Test Fit:
Savanna B
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Jon G
Test Fit:
Jon G
Employee Clayton O
Test Fit:
Clayton O
Employee Evangeline M
Test Fit:
Evangeline M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.