Trailer Wiring Harness Installation - 1999 Dodge Dakota

content loading

Customers compare 118329 to these similar products




Products Featured in this Video



How to Install a Trailer Wiring Harness on a 1999 Dodge Dakota


Today on this 1999 Dodge Dakota pickup we are going to install part number 118329 from Tow Ready. We will go ahead and show you where the connection points are. We are looking at the driver side frame rail. This connection point right here is where one half of our T-connector will fit in. So what we will do is push up on this tab right here and we can pull it apart. And on our driver side we will install the T-connector with the yellow wire. Now we will go over to the passenger side of the vehicle and repeat the same process. Now we will take our 4-pole and run it over the cross tube and down to our hitch. Then we will take the remaining wire and just go ahead and zip-tie it up and out of the way. And with that we are already done with our install. And there you have it for part number 118329 from Tow Ready.


Questions and Comments about this Video

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Shane T
Test Fit:
Shane T
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Andrew K
Video by:
Andrew K
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.