bing tracking image

Wiring Harness Installation - 2003 Chevrolet S-10

content loading

Products Featured in this Video



How to Install a Wiring Harness for a Trailer Hitch on a 2003 Chevrolet S-10


Today on this 2003 Chevrolet S-10 we are going to install part number 118359 from Tow Ready. The T-One wire harness will install on the driver side frame rail at this connection point. We will disconnect it and install the T-Connector. These snap together. The last thing you have to deal with is the ground wire. Just use a self tapping screw and run it right through the bottom of the frame. Now we will take our wiring harness and route it over to our hitch. We will zip tie the wires to the license plate lights and that will keep it safely out of the way. We are already finished. There you have it for part number 118359 from Tow Ready.


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Sue W
Video Edited:
Sue W
Employee Cole B
Installed by:
Cole B
Employee Joe B
Test Fit:
Joe B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.