bing tracking image

Gas Struts Installation And Review Videos


Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL49ER- Video

Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL49ER

Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this custom fit hatch lift support. This is going to replace one warn or damaged ball and socket gas strut for your vehicle's hatch. And this is a custom fit part that is designed to fit the 2004 to 2005 Toyota Sienna. To confirm that this is gonna work for your vehicle, take advantage of our vehicle fit guide here at etrailer.com. more


Watch Video

7/21/2022 3:54:41 PM



Review of Atlas Lift Gas Struts - Custom Fit Trunk Lift Support - ATL65SR- Video

Review of Atlas Lift Gas Struts - Custom Fit Trunk Lift Support - ATL65SR

Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this custom fit trunk lift support. This is going to replace one worn or damaged ball and socket trunk gas strut lift support arm on your vehicle's trunk lid. Again, this is a custom fit part and this is designed to fit specifically the 2003 to 2006 Chevrolet SSR. To confirm that this is going to fit your vehicle, take advantage of our vehicle fit guide here at etrailer.com. more


Watch Video

7/21/2022 3:39:41 PM



Atlas Universal Lift Support Installation- Video

Atlas Universal Lift Support Installation

What's up, everybody It's AJ with etrailer.com. Today we're checking out this universal lift from Atlas Lift, and it's gonna be good for replacing those lifts that are built into your boat doors, or even your RV doors, the basement doors, or your toolboxes. As you see today, we're gonna pop open our toolbox and this one is broken. So, we had to remove it. So, this is gonna be the replacement. It doesn't open as great as it used to. more


Watch Video

6/25/2022 9:57:48 AM



Review of Taylor Made Gas Struts - Marine Gas Strut For Boat Hatches - 3691871-120- Video

Review of Taylor Made Gas Struts - Marine Gas Strut For Boat Hatches - 3691871-120

Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this Taylor Made marine gas strut for boat hatches. Now, this is going to replace one worn or damaged ball and socket gas strut from your boat's hatch lid or compartment door. It extends to ease the lifting of your hatch lid and then it compresses to gently close your hatch without slamming. This is a 13 millimeter ball and socket installation. more


Watch Video

6/21/2022 12:54:30 PM



Review of Atlas Lift Gas Struts - Custom Fit Rear Window Glass Lift Support - ATL33RR- Video

Review of Atlas Lift Gas Struts - Custom Fit Rear Window Glass Lift Support - ATL33RR

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a brief look at this Custom Fit Rear Window Glass Lift Support. This is going to replace one worn or damaged loop mount and ball-and-socket gas strut for your vehicle's rear window glass. Now, as I mentioned, this is a custom fit part that is designed to fit the 1991 to 2001 Ford Explorer, the 1997 to 2001 Mercury Mountaineer, and the 1991 to 1994 Mazda Navajo. To confirm that this is going to work for your vehicle, take advantage of our vehicle fit guide here on our website, input the year, make, and model of your vehicle, and our fit guide will let you know if this will work for your vehicle or if we have another glass lift support that will work for your vehicle. The dampening technology provides smooth operation that is going to eliminate bouncing or jumping. This is going to ensure frictionless movement in all weather conditions. more


Watch Video

6/17/2022 11:45:14 AM



Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL59MR- Video

Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL59MR

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a brief look at this Custom Fit Liftgate Lift Support. Now, this is going to replace one worn or damaged ball-and-socket liftgate gas strut for your vehicle. And as I mentioned, this is a custom fit part that is designed to fit the 1991 to 2001 Ford Explorer, the 1997 to 2001 Mercury Mountaineer, and the 1991 to 1994 Mazda Navajo. To confirm that this is going to fit for your vehicle, take advantage of our vehicle fit guide on our website and input the year, make, and model of your vehicle, and our fit guide will let you know if this will work for your vehicle or if we have another liftgate lift support that will work for your vehicle. The dampening technology provides smooth operation that is going to eliminate bouncing or jumping. This is going to ensure frictionless movement in all weather conditions. more


Watch Video

6/17/2022 11:30:13 AM



Review of Atlas Lift Gas Struts - Custom Fit Rear Window Glass Lift Support - ATL67ZR- Video

Review of Atlas Lift Gas Struts - Custom Fit Rear Window Glass Lift Support - ATL67ZR

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a brief look at this Custom Fit Rear Window Glass Lift Support. Now, this is going to replace one worn or damaged ball-and-socket gas strut for your vehicle's rear window glass. And as I mentioned, this is a custom fit part that is designed to fit the 2001 to 2007 Ford Escape and the 2005 to 2007 Mercury Mariner. To confirm if this is going to work for your vehicle, take advantage of our vehicle fit guide here at etrailer.com, insert the year, make, and model of your vehicle, and our fit guide will let you know if this will work for your vehicle or if we have another rear window glass lift support that will work for your vehicle. The dampening technology provides smooth operation that's going to eliminate bouncing or jumping. This is going to ensure frictionless movement in all weather conditions. more


Watch Video

6/17/2022 11:17:17 AM



Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL74ur- Video

Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL74ur

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a brief look at this Custom Fit Hood Lift Support. This is going to replace one worn or damaged ball-and-socket hood gas strut for your vehicle, and this is a custom fit part that is designed to fit the 2008 to 2009 Buick LaCrosse. To confirm that this is going to work for your vehicle, take advantage of our vehicle fit guide here at etrailer.com and insert the year, make, and model of your vehicle, and our fit guide will let you know if this support will work for your vehicle or if we have another one that will work for your vehicle. Now, this custom fit part has a dampening technology that is going to provide smooth operation that's going to eliminate bouncing or jumping. This is going to ensure frictionless movement in all weather conditions. The arm extends to hold your hood open and then gently compresses while closing, and these nylon ball-and-socket connectors that we've already been looking at together, they're gonna install directly to your existing original equipment manufacturer fittings. more


Watch Video

6/17/2022 10:58:02 AM



Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL93UR- Video

Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL93UR

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a brief look at this Custom Fit Hatch Lift Support. This is going to replace one worn or damaged ball-and-socket gas strut for your vehicle's hatch. Now, this is a custom fit part that is designed to fit the 2013 to 2015 Hyundai Santa Fe. To confirm that this is going to work for your vehicle, take advantage of our vehicle fit guide here at etrailer.com, input the year, make, and model of your vehicle, and our fit guide will let you know if this will work for your vehicle or if we have another hatch lift support that will work for your vehicle. The dampening technology provides smooth operation that is going to eliminate bouncing or jumping. This is going to ensure frictionless movement in all weather conditions. more


Watch Video

6/17/2022 10:45:09 AM



Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL86GR- Video

Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL86GR

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a brief look at this Custom Fit Liftgate Lift Support. This is going to replace one worn or damaged ball-and-socket liftgate gas strut for your vehicle. Now, this is a custom fit part, and this is designed to fit the 2007 to 2014 Jeep Patriot. To confirm if this is going to work for your vehicle, take advantage of our vehicle fit guide here at etrailer.com, and insert the year, make, and model of your vehicle, and our fit guide will let you know if this will work for your vehicle or if we have something else that will work for your vehicle if this will not. The dampening technology provides smooth operation that eliminates bouncing or jumping. This is going to ensure frictionless movement in all weather conditions, and this arm extends to hold your liftgate open and then gently compresses while closing. more


Watch Video

6/17/2022 10:32:40 AM



Review of Atlas Lift Gas Struts - Custom Fit Trunk Lift Support ATL56FR - ATL56FR- Video

Review of Atlas Lift Gas Struts - Custom Fit Trunk Lift Support ATL56FR - ATL56FR

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a brief look at this Custom Fit Trunk Lift Support. Now, this is going to replace one worn or damaged ball-and-socket trunk gas strut lift support arm on your vehicle's trunk lid, and this is a custom fit part that is designed to fit the 2001 to 2006 Chrysler Sebring. Now, to confirm that this is going to fit your vehicle, take advantage of our vehicle fit guide on our website at etrailer.com, and insert the year, make, and model of your vehicle, and our fit guide will let you know if this will work for your vehicle. Now, the dampening technology is going to provide smooth operation that eliminates bouncing or jumping, that's going to ensure frictionless movement in all weather conditions. This arm extends to hold your trunk open, and then gently compresses while closing, and the nylon ball-and-socket connectors that we've already been looking at together, they're gonna install directly to your existing original equipment manufacturer fittings, and this nitride coated steel shaft is corrosion resistant for long-lasting performance. Now, you are going to get one lift support, and I'm just gonna give you some measurements here. more


Watch Video

5/25/2022 5:02:38 PM



Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL28XR- Video

Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL28XR

Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a look at this custom fit hood lift support. Now, this is going to replace one worn or damaged ball and socket hood gas strut for your vehicle. And this is a custom fit part that is designed to fit, specifically, the 2007 to 2010 Toyota FJ Cruiser. To confirm that this will fit your vehicle, take advantage of our vehicle fit guide on our website and input the year, make and model of your vehicle, and our fit guide will let you know if this will fit your vehicle. more


Watch Video

5/20/2022 5:22:30 PM



Review of Atlas Lift Gas Struts - Custom Fit Tailgate Lift - ATL82GR- Video

Review of Atlas Lift Gas Struts - Custom Fit Tailgate Lift - ATL82GR

Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this custom fit tailgate lift support. Now, this is going to replace one worn or damaged ball and socket tailgate gas strut for your vehicle. And this is a custom fit part designed to fit the 2003 to 2008 Toyota Matrix. To confirm if this is going to work for your vehicle, take advantage of our vehicle fit guide on our website and input the year, make and model of your vehicle, and our fit guide will let you know if this will work for your vehicle. more


Watch Video

5/4/2022 11:28:52 AM



Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL45GR- Video

Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL45GR

Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this custom fit hatch lift support. Now, this replaces one worn or damaged ball and socket gas strut for your vehicle's hatch. And as I said, this is a custom fit part. This is designed to specifically fit the 2009 to 2014 Nissan Murano. more


Watch Video

5/4/2022 10:55:48 AM



Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL54ZR- Video

Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL54ZR

Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this custom fit hood lift support. Now, this is going to replace one worn or damaged ball and socket hood gas strut for your vehicle. And this is a custom fit part that is designed to fit the 1998 to 2002 Lincoln Continental. To make sure that this is gonna work for your vehicle, take advantage of our vehicle fit guide on our website and input the year, make and model of your vehicle, and our fit guide will let you know if this will work for your vehicle. more


Watch Video

5/4/2022 10:54:50 AM



Review of Atlas Lift Gas Struts - Custom Fit Tailgate Lift Support - ATL69RR- Video

Review of Atlas Lift Gas Struts - Custom Fit Tailgate Lift Support - ATL69RR

Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this custom fit tailgate lift support. Now, this replaces one worn or damaged bracket style tailgate gas strut for your vehicle. And as I mentioned, this is a custom fit part. So, this is going to fit the 2001 to 2008 Chrysler PT Cruiser. more


Watch Video

5/4/2022 10:52:41 AM



Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL66GR- Video

Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL66GR

Hi everybody. Andy here with etrailer.com. And today, we're gonna take a look at this custom-fit hatch lift support. Now, this is gonna replace one worn or damaged ball and socket gas strut for your vehicle's hatch. And this is a custom-fit part that's going to fit the 2007 to 2008 Volvo C70 and the 2003 to 2014 Volvo XC90. The dampening technology provides smooth operation that eliminates bouncing or jumping. more


Watch Video

4/15/2022 11:03:08 AM



Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL96GR- Video

Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL96GR

Hi, everybody, Andy here with etrailer.com, and today we're gonna take a brief look at this custom-fit liftgate lift support. This is gonna replace one worn or damaged liftgate gas strut for your vehicle. This is a custom-fit part that is designed to fit the 2008 to 2015 Dodge Grand Caravan and the 2008 to 2015 Chrysler Town & Country. To confirm that this is gonna work for your vehicle, take advantage of our vehicle fit guide on our website. Input the year, make, and model of your vehicle, and our fit guide will let you know if this will work for your vehicle. The dampening technology provides smooth operation that eliminates bouncing or jumping. more


Watch Video

4/15/2022 10:52:15 AM



Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL93GR- Video

Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL93GR

Hi, everybody. Andy here with etrailer.com and today we're gonna take a look at this custom fit hood lift support. This is going to replace one warn or damaged ball in socket hood gas strut for your vehicle. This is a custom fit part that's going to fit various years and versions of the Volkswagen Jetta, Golf, GTI, R32, and Rabbit. To confirm that this is going to fit for your vehicle, take advantage of our vehicle fit guide on our website. Input the year, make, and model of your vehicle and our fit guide will let you know if this will work for your vehicle. more


Watch Video

4/15/2022 10:38:55 AM



Review of Atlas Lift Gas Struts - Honda Pilot Rear Window Glass Lift Support Strut - ATL72AR- Video

Review of Atlas Lift Gas Struts - Honda Pilot Rear Window Glass Lift Support Strut - ATL72AR

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this rear window glass lift support arm, and this is a gas strut that is going to replace one rear window glass support arm on your 2009 to 2015 Honda Pilot. This arm is going to extend to help hold your rear window glass open, and then gently compress while closing, so it's not coming smashing down on you. This does have these nylon ball sockets that will connect to the ball studs on your Pilot, so it's gonna be very easy to snap in place then you'll have that nice firm connection. Our overall length from one ball socket to the other, center to center, when we have it expanded is right at 17 and three quarters of an inch. When we have it compressed will be about 10 and nine 16ths of an inch. more


Watch Video

4/11/2022 4:29:24 PM



Review of Atlas Lift Gas Struts - Volkswagen Jetta Trunk Lift Support Gas Strut - ATL74SR- Video

Review of Atlas Lift Gas Struts - Volkswagen Jetta Trunk Lift Support Gas Strut - ATL74SR

Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this trunk lift support arm. This is a gas strut that's gonna replace one trunk lift support arm and this will fit with your 2005 through 2010 Volkswagen Jetta. Now, just to be on the safe side there are several different styles or packages of the Volkswagen Jetta for different year ranges. So I would encourage you to come to etrailer.com, use our vehicle fit guide, select your year, make and model and we'll help you narrow it down to make sure that this is gonna fit for you and your Jetta. more


Watch Video

4/11/2022 4:13:24 PM



Review of Atlas Lift Gas Struts - Lexus Hood Lift Support Strut - ATL32QR- Video

Review of Atlas Lift Gas Struts - Lexus Hood Lift Support Strut - ATL32QR

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Hood Lift Support Arm. This is a gas strut that will replace the one of your hood lift support arms on either your 2002 through 2003 Lexus ES 300 or your 2004 through 2006 Lexus ES 330. This is going to extend to help hold your hood open. So you're not gonna have to worry about it falling down as you're working underneath the hood, hitting you in the back of the head or something like that and it will then gently compress while you're closing your hood, so you don't have to worry about getting your fingers smashed, getting any tools caught and damaging your hood or anything along those lines. So this does have these nylon ball socket connectors that will install directly onto your existing OEM ball studs so very easy to get this snapped in place and have a nice secure fit. more


Watch Video

4/11/2022 3:57:03 PM



Review of Atlas Lift Gas Struts - Lexus Hood Lift Support - ATL43QR- Video

Review of Atlas Lift Gas Struts - Lexus Hood Lift Support - ATL43QR

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Replacement Hood Lift Support. This gas strut is going to replace one hood lift support arm on your 2010 through 2015 Lexus RX 350 or the Lexus RX 450h. So if you have either one of those Lexuses and you're needing to replace that hood arm, this is gonna be exactly what you need. This does have the nylon ball sockets that are going to instantly connect into your OEM ball studs, so very easy to just click those in place and have a nice solid connection. Our overall length from one ball socket, center to the other, we are gonna be right at 20 3/16 of an inch, and when we have this compressed, it is going to be about 11 1/2 inches. more


Watch Video

4/11/2022 3:50:22 PM



Atlas Lift Hood Lift Support Installation - 2014 Ram 2500- Video

Atlas Lift Hood Lift Support Installation - 2014 Ram 2500

What's up everybody. Adam here with etrailer. Today we're gonna be taking a look at the Atlas Lift Gas Strut for our 2014 Ram 2500. Once our struts start to wear out the hood doesn't really wanna stay open. You don't wanna be that guy that's sitting there propping it up whenever you're working on your motor. So by doing this, it's gonna be pretty much a mimic of your OEM. more


Watch Video

4/7/2022 11:03:41 AM



Atlas Lift Hood Lift Support Installation - 2010 Ford F-250 Super Duty- Video

Atlas Lift Hood Lift Support Installation - 2010 Ford F-250 Super Duty

Today we have a 2010 Ford F-250, and we're gonna be taking a look at the Atlas Lift Gas Strut. So this's gonna be for your hood. So what we wanna do if we're replacing this, it's probably not staying up on its own. So I'm using something to prop it up, so when I pop this thing off, it's not gonna fall on me, and also just so to keep it up so we can replace it. One, kinda get an idea of how it's sitting. So right now we have the larger end of the strut on top, and then the rod going through here on the bottom. more


Watch Video

4/7/2022 11:02:25 AM



Atlas Lift Rear Window Glass Lift Support Review- Video

Atlas Lift Rear Window Glass Lift Support Review

Today, we're gonna be taking a look at the Atlas Lift Gate Gas Strut. So these are gonna be for your rear hatches, some hoods but also the rear glass. So the reason why we're replacing it today on my vehicle is it's not doing anything, it doesn't stay up. And that's annoying, especially if you need to grab something out of the back or need to do some maintenance underneath the hood. So be sure to use our fit guide, put your vehicle in, it's at the center at the top of our website. Put your vehicle, years, make and model in there and it'll line you up with the correct one for your specific vehicle. more


Watch Video

4/7/2022 11:00:29 AM



Atlas Lift Rear Window Glass Lift Support Installation - 2001 Chevrolet Tahoe- Video

Atlas Lift Rear Window Glass Lift Support Installation - 2001 Chevrolet Tahoe

Today we're gonna be taking a look at the Atlas lift gas struts on our 2001 Chevrolet Tahoe. So these are gonna be for your rear hatches, some hoods, but also the rear glass. So the reason why we're replacing it today on my vehicle is, it's not do anything. Doesn't stay up. And that's annoying, especially if you need to grab something out of the back, or need to do some maintenance underneath the hood. So be sure to use our fit guide, put your vehicle in, it's at the center, at the top of our website. more


Watch Video

4/7/2022 10:59:29 AM



Taylor Made Marine Gas Strut for Boat Hatches - 10 mm Socket - 60 lb Force - Review 3691879-60- Video

Taylor Made Marine Gas Strut for Boat Hatches - 10 mm Socket - 60 lb Force - Review 3691879-60

Hey everybody, Jared at etrailer.com. Today I wanna take a look at the 23 inch Taylor Made steel gas shock. Now, this is a replacement for one worn or damaged ball and socket gas strut for your boat's hatch wood or your compartment door. The annealed steel and corrosive resistant coating are great for both freshwater and saltwater environments. If we take a look at the shock itself, we can see the cylinder, which houses the guide seal and the piston, and the piston rod, which compresses into the cylinder. On the outside here, we have a 10 millimeter ball socket and those connect to the 10 millimeter ball stud. more


Watch Video

4/1/2022 11:14:38 AM



Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL59GR- Video

Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL59GR

Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a quick look at this Custom Fit Liftgate Lift Support. Now, this is going to replace one worn or damaged ball-and-socket liftgate gas strut for your vehicle, and like I said, this is a custom-fit part, and this is a confirmed fit for a 2001 to 2006 Hyundai Santa Fe. To make sure that this part is gonna work for your vehicle, take advantage of our vehicle fit guide found on our website. Insert the year, make, and model of your vehicle, and our fit guide will let you know if this part will work for you. more


Watch Video

3/16/2022 2:39:42 PM



Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL27RR- Video

Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL27RR

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a quick look at this Custom Fit Liftgate Lift Support. Now, this is going to replace one worn or damaged liftgate gas strut for your vehicle. And as I mentioned, this is a custom fit part, and this is a confirmed fit for a 1997 to 2004 Mitsubishi Montero and also the Montero Sport, same years, 1997 to 2004. To confirm if this will work for your vehicle, take advantage of our vehicle fit guide and input the year, make, and model of your vehicle, and our fit guide will let you know if this will fit your vehicle. The dampening technology provides smooth operation that eliminates bouncing or jumping, so this is going to ensure frictionless movement in all weather conditions. The arm extends to hold your liftgate open and gently compresses while closing, and the nylon ball-and-socket and bracket connectors that we've already been looking at are going to install directly to your existing original equipment manufacturer fittings with the included hardware. more


Watch Video

3/16/2022 2:19:54 PM



Review of Atlas Lift Gas Struts - Ram Replacement Hood Lift Support - ATL44XR- Video

Review of Atlas Lift Gas Struts - Ram Replacement Hood Lift Support - ATL44XR

Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this custom fit hood lift support. This is a gas strut that will replace the lift support arm on your Ram. This works for a 2009 to 2014 Dodge Ram pickup 1500, the 2010 through 2018 Ram 1500, the 2019 Ram 1500 Classic, as well as the 2012 through 2014 Ram 2500. So, if you have any of those iterations of the Ram, this is gonna be a great option for you to replace that hood lift support. more


Watch Video

2/16/2022 2:08:10 PM



Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL33MR- Video

Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL33MR

Hi everybody. Andy here with etrailer.com. And today, we're gonna take a quick look at this custom fit liftgate lift support. Now, this is gonna replace one worn or damaged liftgate gas strut for your vehicle. And like I said, this is a custom fit part. So, this is a confirmed fit for a 1993 to 1998 Jeep Grand Cherokee. more


Watch Video

2/16/2022 1:47:45 PM



Review of Atlas Lift Gas Struts - Custom Fit Rear Window Glass Lift Support - ATL49MR- Video

Review of Atlas Lift Gas Struts - Custom Fit Rear Window Glass Lift Support - ATL49MR

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a quick look at this Custom Fit Rear Window Glass Lift Support. Now, this is going to replace one worn or damaged ball-and-socket gas strut for your vehicle's rear window glass. And as I mentioned, this is a custom fit part, and this a confirmed fit for the 1987 to 1996 Jeep Wrangler. To confirm that this part is going to fit your vehicle, take advantage of our vehicle fit guide found on this product page, input the year, make, and model of your vehicle, and our fit guide will let you know if this part will work for your vehicle. The dampening technology provides smooth operation that eliminates bouncing or jumping. This is going to ensure frictionless movement in all weather conditions. more


Watch Video

2/16/2022 1:26:12 PM



Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL74ER- Video

Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL74ER

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a quick look at this Custom Fit Hood Lift Support. Now, this is gonna replace one worn or damaged ball-and-socket hood gas strut for your vehicle. And as I mentioned, this is a custom fit part, so this is gonna be a confirmed fit for a 2011 to 2014 Ford F-350, F-450, and F-550 cab and chassis, a 2011 to 2016 Ford F-250, F-350, and F-450 Super Duty, and then finally, the 2015 to 2016 Ford F-350, F-450, and F-550 cab and chassis. To confirm that this part is going to work for you, take advantage of our vehicle fit guide on this product page, input the year, make, and model of your vehicle, and our fit guide will let you know if this will work for your vehicle. The dampening technology provides smooth operation that eliminates bouncing or jumping, so this is going to ensure frictionless movement in all weather conditions. The arm extends to hold your hood open and then gently compresses while closing, and the nylon ball-and-socket connectors that we've already been looking at together, they're gonna install directly to your existing original equipment manufacturer fittings. more


Watch Video

2/16/2022 1:08:25 PM



Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL46QR- Video

Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL46QR

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a quick look at this Custom Fit Hatch Lift Support. Now, this is going to replace one worn or damaged bracket and ball-and-socket gas strut for your vehicle's hatch. And again, this is a custom fit part, and this is a confirmed fit for a 1993 to 1998 Jeep Grand Cherokee. To confirm that this is going to work for your vehicle, take advantage of our vehicle fit guide on this product page and input the year, make, and model of your vehicle, and our vehicle fit guide will let you know if this part will work for you. The dampening technology provides smooth operation that eliminates bouncing or jumping, so this is going to ensure frictionless movement in all weather conditions. The arm extends to hold your hatch open and then gently compresses while closing, and these bracket and nylon ball-and-socket connectors that we've already been looking at, along with this ball stud, are going to install directly to your existing original equipment manufacturer fittings. more


Watch Video

2/16/2022 12:09:51 PM



Review of Atlas Lift Gas Struts - Universal Lift Support - ATL44BR- Video

Review of Atlas Lift Gas Struts - Universal Lift Support - ATL44BR

Hi everybody. Andy here with etrailer.com. And today, we're gonna take a quick look at this universal lift support. Now, this is going to replace one worn or damaged ball and socket gas strut for your truck cover, boat hatch, toolbox and more. The dampening technology provides smooth operation that eliminates bouncing or jumping. This is going to ensure frictionless movement in all weather conditions. more


Watch Video

2/16/2022 11:28:11 AM



Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL74MR- Video

Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL74MR

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a quick look at this Custom Fit Liftgate Lift Support. Now, this is going to replace one worn or damaged liftgate gas strut for your vehicle, and as I already mentioned, this is a custom fit part. So this is a confirmed fit for the 1999 to 2004 Jeep Grand Cherokee, and to confirm that this part will work for your vehicle, take advantage of our vehicle fit guide found on this product page. Input the year, make, and model of your vehicle, and our fit guide will let you know if this part will work for your vehicle. The dampening technology provides smooth operation that eliminates bouncing or jumping, so this is going to ensure frictionless movement in all weather conditions, and this arm extends to hold your liftgate open and then gently compresses while closing. And these connectors that we have have already been looking at together, they're gonna install directly to your existing original equipment manufacturer fittings. more


Watch Video

2/16/2022 11:15:24 AM



Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL79GR- Video

Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL79GR

Hi, everybody, Andy here with etrailer.com, and today we're gonna take a quick look at this custom-fit lift gate lift support. Now this is going to replace one worn or damaged ball and socket lift gate gas strut for your vehicle. And as we mentioned, this is a custom-fit part, So this is a confirmed fit for a 2005 to 2010 Honda Odyssey. To confirm that this part will work for your vehicle, take advantage of our vehicle fit guide found on this product page, input the year, make and model of your vehicle, and our fit guide will let you know if this part will work for you. The dampening technology provides smooth operation that eliminates bouncing or jumping. So this is going to ensure frictionless movement in all weather conditions. more


Watch Video

2/16/2022 10:45:29 AM



Review of Atlas Lift Gas Struts - Universal Lift Support - ATL24BR- Video

Review of Atlas Lift Gas Struts - Universal Lift Support - ATL24BR

Hi, everybody, Andy here with etrailer.com, and today we're gonna take a quick look at this universal lift support. Now, this is going to replace one worn or damaged ball-and-socket gas strut for your truck cover, your boat hatch, toolbox, and more. The dampening technology provides smooth operation that eliminates bouncing or jumping. So this is going to ensure frictionless movement in all weather conditions. This arm extends to hold your lid or your hatch open, and then it gently compresses while closing. And the 10-millimeter nylon ball-and-socket connectors that we've already been looking at the together, they're gonna install directly to your existing original equipment manufacturer fittings. more


Watch Video

2/16/2022 10:17:29 AM



Review of Atlas Lift Gas Struts - Replacement 26 Inch Gas Strut Support Arm - ATL92SR- Video

Review of Atlas Lift Gas Struts - Replacement 26 Inch Gas Strut Support Arm - ATL92SR

Hi there. I'm Michael with etrailer.com. Today we're gonna take a quick look at this universal gas strut lift support arm. This is gonna replace one lift support arm for your truck cover, boat hatch, toolbox, or other application. This is going to extend to help hold your lid or hatch open. It's gonna give you a little bit of assistance there as you're opening it. more


Watch Video

2/16/2022 10:07:55 AM



Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL64WR- Video

Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL64WR

Hi everybody. Andy here with etrailer.com. And today, we're gonna take a quick look at this custom fit hatch lift support. Now, this is going to replace one worn or damaged ball and socket gas strut for your vehicle's hatch. And again, this is a custom fit part. So, this is a confirmed fit for the 2005 to 2010 Jeep Grand Cherokee. more


Watch Video

2/16/2022 10:05:56 AM



Review of Atlas Lift Gas Struts - Replacement 18-7/16 Inch Gas Strut Support Arm - ATL37BR- Video

Review of Atlas Lift Gas Struts - Replacement 18-7/16 Inch Gas Strut Support Arm - ATL37BR

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Universal Gas Strut Lift Support Arm. This is gonna replace one lift support arm for your truck cover, boat hatch, toolbox, or other application. This will extend out to hold, help hold your lid or hatch open. It's also gonna give you a little bit of assistance as you're opening it up and then it is going to gently compress while closing so that you don't have to worry about your hatch slamming shut potentially catching your gear or fingers in there. So it is gonna be a really nice component to have working properly for you. more


Watch Video

2/16/2022 9:50:20 AM



Review of Atlas Lift Gas Struts - Universal Lift Support - ATL74BR- Video

Review of Atlas Lift Gas Struts - Universal Lift Support - ATL74BR

Hi everybody. Andy here with etrailer.com. And today, we're gonna take a quick look at this universal lift support. Now, this is going to replace one worn or damaged ball and socket gas strut for your truck cover, boat hatch, toolbox and more. The dampening technology provides smooth operation that eliminates bouncing or jumping. This is going to ensure frictionless movement in all weather conditions. more


Watch Video

2/16/2022 9:48:08 AM



Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL54VR- Video

Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL54VR

Hi, everybody, Andy here with etrailer.com, and today we're gonna take a quick look at this custom-fit hood lift support. Now, this is going to replace one worn or damaged ball-and-socket hood gas strut for your vehicle. Again, this is a custom-fit part. So this is a confirmed fit for the 2005 to 2008 Ford F-150 and the 2008 Lincoln Mark LT. To ensure that this is going to work for your vehicle, take advantage of our vehicle fit guide on this product page. And input the year, make, and model of your vehicle, and our fit guide will let you know if this part will work for you. more


Watch Video

2/16/2022 9:35:57 AM



Review of Atlas Lift Gas Struts - Replacement 17-3/16 Inch Gas Strut Support Arm - ATL73BR- Video

Review of Atlas Lift Gas Struts - Replacement 17-3/16 Inch Gas Strut Support Arm - ATL73BR

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Universal Gas Strut Lift Support Arm. This is gonna replace one lift support arm for your truck cover, boat hatch, toolbox, or other application. It will extend out to help keep your lid or hatch open, and it'll give you a little bit of assist as you're extending it out, and then it's going to gently compress while you're closing to help prevent it from slamming shut, potentially causing damage to fingers or equipment that you have in the way, so it is going to be a very important component. So if you are looking to replace one, this is gonna do a good job. It does have the 10 millimeter nylon ball socket connectors, so it will snap right in place onto your 10 millimeter ball studs, give you a nice solid connection. more


Watch Video

2/16/2022 8:43:35 AM



Review of Atlas Lift Gas Struts - Universal Lift Support - ATL88BR- Video

Review of Atlas Lift Gas Struts - Universal Lift Support - ATL88BR

Hi everybody. Andy here with etrailer.com. And today, we're gonna take a quick look at this universal lift support. Now, this is going to replace one worn or damaged ball and socket gas strut for your truck cover, boat hatch, toolbox and more. The dampening technology provides smooth operation that eliminates bouncing or jumping. So, this is going to ensure frictionless movement in all weather conditions. more


Watch Video

2/15/2022 4:54:15 PM



Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL95SR- Video

Review of Atlas Lift Gas Struts - Custom Fit Hood Lift Support - ATL95SR

Hi, everybody, Andy here with the etrailer.com. And today we're gonna take a quick look at this custom-fit hood lift support. Now, this is gonna replace one worn or damaged ball-and-socket hood gas strut for your vehicle. And again, this is a custom fit part. So, this is a confirmed fit for the 2008-2010 Ford F250 Super Duty, F350 Super Duty, and F450 Super Duty. Again, those years, 2008 to 2010. more


Watch Video

2/15/2022 4:40:26 PM



Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL35UR- Video

Review of Atlas Lift Gas Struts - Custom Fit Hatch Lift Support - ATL35UR

Hi everybody. Andy here with etrailer.com. And today, we're gonna take a quick look at this custom fit hatch lift support. Now, this is going to replace one worn or damaged ball and socket gas strut for your vehicle's hatch. And again, this is a custom fit part. And this is a confirmed fit for the 2008 to 2009 Jeep Liberty. more


Watch Video

2/15/2022 4:26:16 PM



Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL28VR- Video

Review of Atlas Lift Gas Struts - Custom Fit Liftgate Lift Support - ATL28VR

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a quick look at this Custom Fit Liftgate Lift Support. Now, this is going to replace one worn or damaged bracket style and ball-and-socket liftgate gas strut for your vehicle. This liftgate lift support is a confirmed fit for the 1997 to 2001 Jeep Cherokee. To make sure that this part is going to work for you, take advantage of using our vehicle fit guide found on this product page and input the year, make, and model of your vehicle, and our guide will let you know if this part will work for your vehicle. Now, the dampening technology provides smooth operation that eliminates bouncing or jumping, so this is going to ensure frictionless movement in all weather conditions. This arm extends to hold your liftgate open and then it gently compresses while closing. more


Watch Video

2/15/2022 4:03:45 PM



Review of Atlas Lift Gas Struts - Replacement 12 Inch Gas Strut Support Arm - ATL95QR- Video

Review of Atlas Lift Gas Struts - Replacement 12 Inch Gas Strut Support Arm - ATL95QR

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Universal Gas Strut Lift Support Arm. This is going to replace one lift support arm on your truck cover, boat hatch, toolbox, or other application. This does extend to help hold your lift or hatch open, it's also gonna give you a little bit of assistance as you're opening it up, and then it's going to gently compress while you're closing, so you don't have to worry about getting your fingers smashed or any of your equipment getting caught in a quickly closing lid or hatch. This does have these 10 millimeter nylon ball sockets here that are going to allow you to very easily install directly onto your 10 millimeter ball studs and just snap right in place, give you that nice firm connection there. Our overall length from the center of one ball socket to the center of the other, we're gonna be just over 12 inches, we'll call it 12 1/16 of an inch, our compressed length is going to be 7 1/2 inches, so our stroke here is gonna be 4 9/16 of an inch. more


Watch Video

2/15/2022 11:32:53 AM



  1     2     3