bing tracking image

Trailer Door Holders Installation And Review Videos


JR Products T-Style Hook and Keeper Door Holder Review- Video

JR Products T-Style Hook and Keeper Door Holder Review

What's up, everybody It's AJ with etrailer.com. Today, we're gonna be checking out this door holder from JR Products. It's gonna be stainless steel, it's gonna be four inches long, and what it's gonna do is it's gonna help you keep that door open when you're inside the trailer or working around it. Let's check it out. Checking out how it works, it's got the four-inch stainless-steel arm that's gonna hook into the catch here, and that's what's gonna keep the door in place. So as I bring the door closer to it, and I'm trying to stay outta the way so you can see it, it just goes in there. more


Watch Video

4/18/2022 8:00:19 AM



JR Products T-Style Hook and Keeper Door Holder Review- Video

JR Products T-Style Hook and Keeper Door Holder Review

What's up everybody It's AJ with etrailer.com. Today, we're gonna be checking out the Jr products four inch T-style Door Holder. As you can see behind me on our trailer our holder here has seen better days. It's about to fall off. So I figured it was time to go ahead and replace it. So we got a new one and we're gonna go through that now. more


Watch Video

4/18/2022 7:59:06 AM



Polar Plunger and Socket Trailer Door Holder Review- Video

Polar Plunger and Socket Trailer Door Holder Review

Hey guys, it's Jake here with etrailer. Today we're gonna be taking a look at, and I'm gonna show you how to install the Polar Hardware plunger and rubber socket door holder. This door holder is going to be a nice flush design. Gonna hold your door open while you're loading it up, or out working. And now you're not gonna have to worry about having something propped against your door to keep it open. You're gonna have a nice open doorway to be able to walk in and out while you're loading. more


Watch Video

1/12/2022 11:25:20 AM



JR Products T-Style Hook and Keeper Door Holder Review and Installation- Video

JR Products T-Style Hook and Keeper Door Holder Review and Installation

Hi, there RV and camper owners. Today, we're gonna be taking a look at and showing you how to install Jr Products, RV door keepers. These come in a 45, like we're showing off today, but you can also get it with a straight or a 90 degree. And that just depends on how far your door does swing open. This particular one here, we would hit the awning, if we would go any further open, so the 45 was perfect for this one. And this is what our latch looks like when it's installed. more


Watch Video

3/26/2021 10:58:10 AM



Polar Enclosed Trailer Door Hook and Keeper Installation- Video

Polar Enclosed Trailer Door Hook and Keeper Installation

Today in your 2021 Jayco Greyhawk we're gonna be taking a look at and showing you how to install Polaris' Replacement Door Latch. This is gonna be a direct replacement for your existing door latches. It has similar mounting holes and sizes, so that way, it will line right up, so you don't have to drill any additional holes into your motor home. It's a metal upgrade, so if you had a plastic one before, you'll now have a metal one. So, you don't have to worry about it breaking like your old one did. It has a zinc plating on it to protect it against rust and corrosion so, you'll have long lasting operation of your new latch. more


Watch Video

3/25/2021 9:12:26 AM



Polar Enclosed Trailer Door Hook and Keeper Review- Video

Polar Enclosed Trailer Door Hook and Keeper Review

Adam: Hi, everyone. Adam with etrailer.com. Today, we're going to be taking a look at the Polar Hardware Hook and Keeper for your enclosed trailer doors. So, this enclosed trailer specifically, and some of the others from the factory didn't really have a keeper for our door. So, there was a couple times we we're working on this doing a video, and it was hard to keep this door open. So luckily with this, you can just mount it up pretty easily like that, and now we're going to have a nice little spot to hook this hook onto the keeper like that. more


Watch Video

4/1/2020 11:07:10 AM



Polar Enclosed Trailer Door Hook and Keeper Review and Installation- Video

Polar Enclosed Trailer Door Hook and Keeper Review and Installation

Adam: Hi, everyone, Adam with etrailer.com. Today, we're going to be taking a look at the Polar Hardware Hook and Keeper for your enclosed trailer doors. This enclosed trailer specifically, and some of the others from the factory didn't really have a keeper for our door. So, there was a couple times we we're working on this doing a video, and it was hard to keep this door open. So luckily with this, you can just mount it up pretty easily like that, and now we're going to have a nice little spot to hook this hook onto the keeper like that. And now we really don't have to worry about having that situation happen again. more


Watch Video

3/31/2020 10:27:09 AM



Buyers Products Enclosed Trailer Door Hook and Keeper Review and Installation- Video

Buyers Products Enclosed Trailer Door Hook and Keeper Review and Installation

Adam: Hi, everyone, Adam, with etrailer. Today, we're going to be taking a look at some hooks for your enclosed trailer doors. This one in particular didn't come with one from the factory, and we're pretty much level here. We have a little bit of an incline just because of the way our jack is sitting, but as you can see it doesn't want to stay open on its own. So that's, what's going to help this situation. We're now just going to have a little latch just so whenever we are on an incline or decline, maybe we're unloading or loading stuff up maybe before move or just unloading equipment on the site. more


Watch Video

3/31/2020 10:22:19 AM



Polar Enclosed Trailer Door Hook and Keeper Review and Installation- Video

Polar Enclosed Trailer Door Hook and Keeper Review and Installation

Adam: Hi, everyone. Adam with etrailer.com. Today, we're going to be taking a look at the Polar Hardware Hook and Keeper for your enclosed trailer doors. So, both of these brackets are going to be made of aluminum, so they're going to naturally resist against rust and corrosion. They're not going to be as strong as some of those stainless steel or zinc plated ones that we also offer, but they are going to be stronger than nothing, and of course a little bit stronger than plastic as well.This enclosed trailer specifically, and some of the others from the factory didn't really have a keeper for our door. So, there was a couple times we we're working on this doing a video, and it was hard to keep this door open. more


Watch Video

3/31/2020 10:17:16 AM



JR Products Flat T-style Hook and Keeper Door Holder Review and Installation- Video

JR Products Flat T-style Hook and Keeper Door Holder Review and Installation

Adam: Hi everyone, Adam, with etrailer.com today, we're going to be taking a look at some JR products hook and keeper. These are going to be for your RV or enclosed trailer doors. Not a lot of these trailers come with these kind of props for your doors, from the factory, this one didn't. And that's why we're putting one on today, but this is just going to be ideal for either at the job site or even if you're moving someone in loading and unloading, or if you're just at your RV and you're tired of having your doors swing open. It's just going to allow us to be able to set the right amount of length between our two brackets here, just to get that ideal spot, to keep this open, just so we don't have to have it closing on us all the time. I know with this trailer specifically, it's really dark in there.So the more sun we can get in there, the better, and with this door open, even if we're unloading off the back it's definitely going to get that done for us. more


Watch Video

3/31/2020 10:12:17 AM



JR Products T-Style Hook and Keeper Door Holder Review- Video

JR Products T-Style Hook and Keeper Door Holder Review

Colin: Hey, everyone, it's Colin here at etrailer. And today, I'm going to take some time to show you guys these JR products: hooks and keepers. Basically what these are going to do for you is you mount them to the sides of your trailer, whether it's your enclosed trailer, or maybe your RV, and this just going to give you a way to prop open your door.So, for example, for loading and unloading this utility trailer, what we can do is open up the door and then put that wand into the keeper. And what that's going to do is keep our door propped open so that when we're loading and unloading our cargo, the door's not going to swing closed while we're trying to go in and out. And these wands are about three inches long, so it's going to keep your door pretty flush against the side of your trailer or your camper.You see we have it in polar white right now. It matches our trailer very nicely, but it is also available in other colors. more


Watch Video

3/23/2020 4:52:08 PM



JR Products T-Style Hook and Keeper Door Holder Review- Video

JR Products T-Style Hook and Keeper Door Holder Review

Colin: Hey guys, it's Colin here at etrailer and today, I'm just going to take some time to show you guys these JR Products hooking keepers. Basically, what these are going to do is just hold the side door or the back swinging doors of your enclosed trailer or camper open so that you can go in and out with ease, don't have to worry about opening the door every time you want to go in. So for days like today where there's actually a breeze going, what we can do is just open up the door, put the wand into the keeper just like that, it's very simple. And from there, it's just going to hold the door open so we can go in and out, load and unload as we please.Now with these certain hooking keepers, a six inch version, they are available in a lot of different constructions and colors. For these plastic ones, you can see we have the Polar White which matches our trailer very well. We have this Colonial White in the middle and then black as well, so you can choose the one that's going to best match your trailer, whichever one you want. more


Watch Video

3/18/2020 1:37:43 PM



Review of JR Products Enclosed Trailer Parts - Angled Post and Socket Door Holder - 37210304- Video

Review of JR Products Enclosed Trailer Parts - Angled Post and Socket Door Holder - 37210304

Ellen: Hey everyone, I'm Ellen here at etrailer.com, and today we're going to be taking a look at the angled plunger and door socket. This is going to help to hold your door open whenever you're loading things into your enclosed trailer, whether that's gear, equipment or anything else. It's going to have an offset to it and an angled plunger there. So if your door kind of hits an angle with your wall, this is going to be a good fit for you. So just push the plunger into the socket and that's going to hold your door open. That way you can get in and out without having to fight with that door every time. more


Watch Video

2/28/2020 6:27:24 PM



Review of JR Products Enclosed Trailer Parts - 4 Inch Hook and Keeper Door Holder - 37210465- Video

Review of JR Products Enclosed Trailer Parts - 4 Inch Hook and Keeper Door Holder - 37210465

Ellen: Hey everyone. I'm Ellen here at etrailer.com and today we're taking a look at the T hook and keeper. This is going to be a nice little device to help keep our door open on our enclosed trailer or RV, or really anywhere that you need, you have a door to hold open that way when you're loading things into your vehicle or the area that you're putting stuff in, and you don't have to have somebody hold the door, or you don't have to find something to prop it up against or go through any kind of scenarios like that. So it's going to make life a little bit easier, especially as we're loading things in and out. We don't have to worry about that door coming close and smacking us in the face or just having to open it and fumble around with all our things. So it's just going to be this simple plastic construction, even though it's plastic, it's still going to be pretty structurally sound.So I don't think it's... more


Watch Video

2/26/2020 6:32:11 PM



Review of JR Products Enclosed Trailer Parts - Door Hook and Keeper- 90 degree - 37206-11875- Video

Review of JR Products Enclosed Trailer Parts - Door Hook and Keeper- 90 degree - 37206-11875

Hi there. I'm Michael with etrailer.com. Today we're taking a quick look at the 90 degree Hook and Keeper set. This is going to allow you to hold your RV or trailer door open and because of the 90 degree angle of our hook arm here, we will be able to use this around awning arms, so we can securely connect all of our doors despite the obstacles.So basically, if you're not familiar with the way this works, you'd attach this to either your door or the side of your RV or camper. And then attach this piece again either to the door or side of the camper. So if you have this on the door, you'd want this on the side of the camper. more


Watch Video

2/5/2020 8:27:06 AM



Review of Buyers Products Enclosed Trailer Parts - Doors - BP64FR- Video

Review of Buyers Products Enclosed Trailer Parts - Doors - BP64FR

Jeff: Today we're going to take a look at the Buyers Products aluminum four-inch door hold back with the hook and keeper for enclosed trailer doors. This hook and keeper is used to hold doors and windows open on your enclosed trailer, horse trailer or toy hauler. The spring-loaded latch mechanism right here on the keeper holds the door open to prevent unwanted closing. It is a zinc-plated aluminum design, and the hook length measured from here to here is about four inches. But basically right now it's hooked, so if you want to unhook it, you just push in on this latch and release it. That'll fall down and then it'll close. more


Watch Video

2/1/2020 7:57:06 AM



Review of JR Products Enclosed Trailer Parts - Door Keeper - 37210515- Video

Review of JR Products Enclosed Trailer Parts - Door Keeper - 37210515

Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the hook and keeper for your enclosed trailer. This is going to allow you to keep your trailer or RV door open. So, if a gust of wind comes along or something like that, you're not going to have to worry about that door slamming shut, potentially causing damage or injury.It's a very simple design. It's got two different brackets, you mount one on the door, one on the side of your RV or trailer. more


Watch Video

1/6/2020 8:02:05 AM



Review of JR Products Enclosed Trailer Parts - Doors - 37210495- Video

Review of JR Products Enclosed Trailer Parts - Doors - 37210495

Michael: Hi there. I'm Michael with etrailer.com. Today we're going to take a quick look at the hook and keeper for your enclosed trailer.This is going to allow you to keep your trailer door open so it's not going to close on you if there's a blast of wind or anything like that. You're not going to have to worry about any potential damage or injuries from that door swinging closed. It's a very simple design. You've got two brackets here. more


Watch Video

1/6/2020 7:32:05 AM



Review of JR Products Enclosed Trailer Parts - Door Keeper - 37211785- Video

Review of JR Products Enclosed Trailer Parts - Door Keeper - 37211785

Hey everyone. I'm Ellen here at eTrailer.com. Today, we're taking a look at the hook and keeper for enclosed trailer doors. This is going to have a 90 degree angle hook to allow for going around any kind of obstacles, maybe things like an awning arm, and it's going to help to keep your door in place.As we move that out, it can fit into our keeper there and hold that door open so we can get our luggage, or gear, or groceries put in place, in our enclosed trailer or our RV. Whatever you might have with you to be able to do that and not have to worry about that door swinging back, closed at you.It comes with the hardware to get that attached, so we'll have four screws for each side there. This is made out of a stainless steel construction, so we shouldn't have to worry about any rust or corrosion over time with this. more


Watch Video

12/3/2019 6:17:05 PM



Review of JR Products Enclosed Trailer Parts - Door Holder - 37210665- Video

Review of JR Products Enclosed Trailer Parts - Door Holder - 37210665

Hey everyone, I'm Ellen here etrailer.com. Today, we're taking a quick look at the JR Products Low Profile Bumper Door Holder. So this is just going to be a pretty simple way to keep the door on your RV or your enclosed trailer open. So the little nub here is going to just fit inside the keeper. This is going to be made of a rubber material, so it does have some give to it, so it'll stretch and conform around that little nub, and it should just pop into place. And I don't want to push that all the way in there, since I don't have the screws in place, it might be kind of hard to get out without it actually being attached, but that's basically how this is going to work. more


Watch Video

11/21/2019 10:42:18 AM



Review of JR Products Enclosed Trailer Parts - Door Holder - 37210284- Video

Review of JR Products Enclosed Trailer Parts - Door Holder - 37210284

Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a quick look at the JR Products plunger and rubber socket door holder. Now, this is going to be a handy way to keep your door from coming back open or urge from going back closed in your RV, or your enclosed trailer, wherever you might need this to be. So you can put this on the outside to hold that door open so you can load in equipment, or luggage, or whatever you might be putting into that enclosed trailer. So basically, just this plunger piece is going to go into that little rubber socket, and once it's in there, it's going to hold tight so we won't have our door coming back closed on it, even if there is a gust of wind or maybe we're on a little bit of an incline or anything like that.It comes with the mounting hardware to get that installed. more


Watch Video

11/21/2019 9:47:16 AM



Review of JR Products Enclosed Trailer Parts - Plunger and Socket Door Holder - 37210294- Video

Review of JR Products Enclosed Trailer Parts - Plunger and Socket Door Holder - 37210294

Ellen: Hey everyone, I'm Ellen here at etrailer.com. Today, we're taking a quick look at the JR Products Plunger and Rubber Socket Door Holder. So this is going to help to keep your door open, especially if you're loading in things to your RV or your camper, things like groceries, luggage, kids, whatever the case might be. So this is going to help to keep that door open so you can keep loading things in without having to use your hands and help to prevent that door from coming back at you. So this is going to have a two piece design, we'll have our plunger, and then the socket here that this is going to fit into. So that rubber socket it just rests in place there, but basically that's just going to push in and a pretty good amount of tension put on there. more


Watch Video

11/12/2019 10:02:19 PM



Review of JR Products Enclosed Trailer Parts - Angled Door Keeper - 37211765- Video

Review of JR Products Enclosed Trailer Parts - Angled Door Keeper - 37211765

Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the JR Products Hook and Keeper for Enclosed Trailers. Now this is going to have a 45 degree angle to it. So it's going to go around obstructions, things like an awning arm or something like that. And it's also going to be spring loaded. more


Watch Video

11/12/2019 9:37:19 PM



Review of JR Products Enclosed Trailer Parts - Angled Door Holder - 37210314- Video

Review of JR Products Enclosed Trailer Parts - Angled Door Holder - 37210314

Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the Jared products plunger and rubber socket door holder. Now this is going to be a handicap to keep your door open, especially if you're loading things in and out of your trailer or your RV. It's going to keep that door from swinging close on you and having to open it every time, especially if you have things in your hands and you don't really have a hand free to do so. So you can push this rod piece into the... more


Watch Video

11/12/2019 9:07:35 PM



Review of JR Products Enclosed Trailer Parts - Door Holder - 37210645- Video

Review of JR Products Enclosed Trailer Parts - Door Holder - 37210645

Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the JR Products' pivoting door holder. This is going to be a handy piece to have, to keep your door open on your trailer, to maybe keep it from closing on you especially if you're loading things in and out of your trailer. It's just going to be a kind of a rod and keeper style, so it's going to fit into this little polymer piece, and that's what's going to hold it in place. So it's going to work best on those areas where your door is going to kind of come straight out, and you just can push it onto that polymer piece to keep that in place. more


Watch Video

11/12/2019 8:57:16 PM



Review of JR Products Enclosed Trailer Parts - 90 Degree Angle Hook and Keeper - 37211775- Video

Review of JR Products Enclosed Trailer Parts - 90 Degree Angle Hook and Keeper - 37211775

Ellen: Hey, everyone. I'm Ellen here etrailer.com. Today, we're taking a look at the JR Products Hook and Keeper for enclosed trailer.Now, this is going to have a 90-degree arm and a zinc-plated steel design, so it's going to be very sturdy and secure, and also allow us to go around any kind of obstacles that might be in the way of a normal hook and keeper. So, things like awning arms, this is going to go around those and still keep that door open so you don't have to worry about it coming closed on you whenever you're trying to load things in or out of your trailer. It does come with the hardware to mount it in place. Again, it's going to be a zinc-plated steel construction, so it should be pretty durable and long-lasting.As far as the size for each of our pieces, it's going to be about 3" long by about 1-3/4" wide. more


Watch Video

11/12/2019 8:52:18 PM



Review of JR Products Enclosed Trailer Parts - 45 Degree Angle Hook and Keeper - 37211755- Video

Review of JR Products Enclosed Trailer Parts - 45 Degree Angle Hook and Keeper - 37211755

Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the JR Products hook and keeper for enclosed trailer.Now, there are a lot of options out there, but this one is going to have a zinc-plated design. So it's going to be a zinc-plated steel with a 45-degree hook on this. So it's going to be a little bit off to allow for maybe some other things that are mounted on your trailer, maybe an awning or something like that. So this can go around it and still keep that door open so you can get things loaded in and out without any issues of that door coming back and swinging closed on you. more


Watch Video

11/12/2019 8:42:18 PM



Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210505- Video

Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210505

Hey everyone, I'm Ellen here at etrailer.com. Today we're taking a look at the JR Products Hook and Keeper for Enclosed Trailer. This is going to be a six inch span for your trailer to help keep that door open while you're moving in and out, maybe bringing things in and out of your trailer, loading things up. And this is going to be a zinc plated steel, so it's going to resist any kind of rusting and corrosion, and do a good job of lasting for a long time for you. Our hardware is going to be the same, zinc plated steel, so everything's going to match up there and we shouldn't really have to worry about any rusting. Now these are going to again, keep your door open so you don't have to worry about that door closing on you. more


Watch Video

11/12/2019 8:37:27 PM



Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210525- Video

Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210525

Ellen: Hey, everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the JR Products Hook and Keeper for enclosed trailers. This is going to be a handy thing to have on the side of your enclosed trailer to make sure that everything stays open, especially if you're loading cargo in and out of your trailer, or maybe just moving in between outside and inside. Basically, one side just gets mounted to the side of your trailer, the other one gets mounted to your door. Then as you open that up, just drop that arm into the slot, and it's going to hold everything nice and secure. more


Watch Video

11/12/2019 8:32:17 PM



Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210482- Video

Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210482

Ellen: Hey everyone. I'm Ellen [email protected] Today, we're taking a look at the Jr products hook and keeper for enclosed trailer. This is going to have a 10 inch long hook, and this is just going to help you keep that door open on your enclosed trailer so that you don't have that coming back closed on you whenever you're loading things in and out, or maybe just moving in and out of that trailer. This is going to give us a pretty long distance between our door and the side of our trailer with that 10 inch span. Basically this is just going to work pretty simply to capture in that receiver there, and then provide us with that space between our door and the side of our trailer. more


Watch Video

11/12/2019 8:17:22 PM



Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210444B- Video

Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210444B

Hey everyone, I'm Ellen here at etrailer.com. Today we're taking a quick look at the JR Products Hook and Keeper for enclosed trailers. Now this is just a set to help you keep your door open on your enclosed trailer, especially if you're loading things in and out or maybe just coming in and going inside that enclosed trailer. You don't want to worry about having to open that door every time or have it come closed on you in a high wind and things like that. It's just going to be a wand and then a receiver portion. So as the door opens, it's going to catch that little wand and keep that in place. more


Watch Video

11/12/2019 8:07:20 PM



Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210605- Video

Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210605

Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the JR Products Hook and Keeper for Enclosed Trailer. This is going to be kind of a uniquely designed one with a 90 degree angle in it to help go around any kind of obstructions that you might have in the way of a normal operation for this. So if you need it to kind of come around like that, it should work out pretty well for you. It's just made of a plastic construction, comes with the hardware needed to get this installed. more


Watch Video

11/12/2019 7:47:24 PM



Review of JR Products Enclosed Trailer Parts - Hook and Keeper with Bumper - 37210414B- Video

Review of JR Products Enclosed Trailer Parts - Hook and Keeper with Bumper - 37210414B

Ellen: Hey everyone. I'm Ellen here, @etrailer.com. Today we're taking a look at the JR Products hook and keeper for enclosed trailer. Now there's a lot of different configurations for this set out there. This one in particular is going to have a three and a half inch span. So, should if I flip this around the other way, that's going to be the right way. more


Watch Video

11/12/2019 7:37:17 PM



Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210414- Video

Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210414

Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the JR Products, Hook and Keeper for enclosed trailer. And there are a lot of different configurations for these out there, and basically it's just going to help you keep your door open on your enclosed trailer, especially if you're loading things in and out and just wanting to keep that door open.This is going to be a three and a half inch span. So that's going to be the distance between our receiver and our base. If you want to find a different length, we have a lot of options available here etrailer.com, so definitely check those out if you're interested.This comes with the hardware to mount it up, we'll get our eight screws. more


Watch Video

11/12/2019 7:27:22 PM



Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210324- Video

Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210324

Ellen: Hey, everyone. I'm Ellen, here at etrailer.com. Today, we're taking a look at the JR Products hook and keeper for an enclosed trailer. Now, there are a lot of different configurations and sizes for these out there but this one is going to be a three and a half inch span. That's going to be the distance between one end and the other. If you want to keep your door a little bit closer together at that three and a half inch mark, this will be a good fit for you. more


Watch Video

11/12/2019 7:02:57 PM



Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210475- Video

Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210475

Ellen: Hey, everyone. I'm Ellen here at etrailer.com. Today, we're taking a quick look at the JR Products hook and keeper for enclosed trailer. This is just an easy way to keep your door open so it doesn't swing back closed on you when you're trying to load things in and out of your enclosed trailer. These come in a lot of different shapes and sizes. This one in particular is going to be a six inch long wand, so it'll work out well for those doors that have about a six inch span between the door being open and the side of your enclosed trailer.Whenever you have this mounted up, it should look something like this. more


Watch Video

11/12/2019 6:57:18 PM



Review of JR Products Enclosed Trailer Parts - Doors - 37210444- Video

Review of JR Products Enclosed Trailer Parts - Doors - 37210444

Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a quick look at the JR Products hook and keeper for enclosed trailer. Now this is going to help keep your door open whenever you have that on your enclosed trailer. So when you open it up, you have one side mounted on your door. The other side mounted on the wall of your trailer, and this hook keeps it locked into place so that door doesn't close on you, swing back, or cause any damage. more


Watch Video

11/5/2019 11:47:54 AM



Review of Buyers Products Enclosed Trailer Parts - Doors - 337DH5006SS- Video

Review of Buyers Products Enclosed Trailer Parts - Doors - 337DH5006SS

Michael: Hi there, I'm Michael with etrailer.com. Today, we're taking a look at the Buyers Products Hook and Keeper for your enclosed trailers. These are going to mount onto the body of your trailer and onto the trailer door or window. They're going to interconnect like so, so that your door or window will stay open. This is going to be a very solid connection as you can see. You'll have to bring the door or window closer in to get that latch raised up, so that they will come apart again.Both of these components are made of stainless steel, so they're going to hold up very well for you. more


Watch Video

10/10/2019 9:47:19 AM



Polar Hardware Enclosed Trailer Parts - Doors - PLR62-66 Review- Video

Polar Hardware Enclosed Trailer Parts - Doors - PLR62-66 Review

Today we're going to be taking a look at the plunger and rubber socket door holder. This kit will hold your trailer door in the open position with ease by mounting one part to the door and the other part to the side of your trailer. Typically, the plunger which is this piece right here, this gets mounted to the door. The socket gets mounted to the trailer body and when you swing open your door, the plunger goes into the socket and that's going to hold your trailer door in the open position. Really nice, tight secure fit. The unit's made from a zinc plated steel construction. Does a really good job at resisting rust and corrosion. We're going to take a look at some of the measurements real quick starting with the plunger. more


Watch Video

5/8/2017 8:55:10 AM



Redline Enclosed Trailer Parts - Doors - DH39R Review- Video

Redline Enclosed Trailer Parts - Doors - DH39R Review

Today, we're going to take a look at the plastic stem and the rubber socket door holder. Now this part will hold trailer doors open with ease by mounting one part to the door, the other to the side of your trailer, and then when you push it together, the stem will actually insert into that rubber socket and hold the door open. Once it's installed in there, it does create a two and a quarter inch gap between the trailer and the door when in use.Now the metal parts in this socket, there is a metal part that's threaded here. It is zinc plated to resist rust and corrosion. This part also can be used on windows if you'd like. A few dimensions on this, the overall length on the stem, we're right at two inches and the length on the rubber socket is one and three eighths inches. more


Watch Video

2/23/2017 9:18:24 AM



Redline Enclosed Trailer Parts - Doors - DH38R Review- Video

Redline Enclosed Trailer Parts - Doors - DH38R Review

Today, we're going to just take a look at the Plastic Stem and the Rubber Socket Door Holder. These parts will hold your trailer doors open with ease by mounting one part to the door, the other to the side of your trailer. Then when you push it into there, that would actually go in further and would hold securely your doors open. When it does go in there, it'll create a 1 3/8" gap between the trailer and the door when it's in use.Now, there is a metal part right at the bottom of the socket that has threads in it. That is zinc plated to help resist rust and corrosion. This part actually could also be used on windows if you'd like. more


Watch Video

2/23/2017 9:03:24 AM



Polar Hardware Enclosed Trailer Parts - Doors - PLR64-66 Review- Video

Polar Hardware Enclosed Trailer Parts - Doors - PLR64-66 Review

Today we're going to be take a look at the Polar hardware plunger and rubber socket door holder. Now this part is designed to hold your trailer door open with ease by mounting one part to the door, one to the other side of your trailer, and then as you push the door the plunger will go into the rubber socket and hold it in the open position. These parts have a nice zinc plating to them. Going to give you a few dimensions on this. We're going to start with the plunger. We're going to measure the mounting hole dimension center to center. If we go center to center, it's right at 2". more


Watch Video

12/8/2016 2:40:37 PM



Polar Hardware Enclosed Trailer Parts - Doors - PLR9-A Review- Video

Polar Hardware Enclosed Trailer Parts - Doors - PLR9-A Review

Today we're going to be taking a look at the Hook and Keeper for enclosed trailers. A Hook and Keeper is used to hold doors and windows open on your enclosed trailer. One piece is mounted to the side of the trailer, typically this piece right here. The other is mounted to the door, which would typically be this piece right here. Once you open your door the hook goes into the keeper, and that's going to hold the door, or window, on your enclosed trailer in the open position. Nice secure connection point right there. Each piece is going to feature the pre-drilled mounting holes. more


Watch Video

8/2/2016 1:35:54 PM



Polar Hardware Enclosed Trailer Parts - Doors - PLR9-SS Review- Video

Polar Hardware Enclosed Trailer Parts - Doors - PLR9-SS Review

Today we are going to be at the hook and keeper for enclosed trailers. Now the hook and keeper is used to hold doors and windows open on your enclosed trailer. One piece is usually mounted to the side of the trailer. Typically it's going to be this piece right here. You would mount it just like this and then this would just hang down flat. The other would be mounted to the door, typically this piece right here. more


Watch Video

8/2/2016 1:05:49 PM



Polar Hardware Enclosed Trailer Parts - Doors - 383400 Review- Video

Polar Hardware Enclosed Trailer Parts - Doors - 383400 Review

more


Watch Video

9/14/2012 11:19:36 AM



Redline Enclosed Trailer Parts - Doors - DH605 Review- Video

Redline Enclosed Trailer Parts - Doors - DH605 Review

more


Watch Video

9/13/2012 2:18:42 PM



Redline Enclosed Trailer Parts - Doors - DH604 Review- Video

Redline Enclosed Trailer Parts - Doors - DH604 Review

Today were going to review part number DH604. This is the Redline Plunger and Nylon Socket door holder. This part is designed to hold trailer doors open with ease by mounting one part to the door, the other part to the side of your trailer. Itll create a 1 inch gap between the trailer and the door is in use. The metal is zinc-plated to resist rust and corrosion. The nylon socket is made of a strong sturdy nylon material. more


Watch Video

9/13/2012 1:21:23 PM



  1