Chevrolet Brake Controller with Wiring Installation And Review Videos

  

Trailer Brake Controller Installation - 2004 Chevrolet Silverado- Video

Trailer Brake Controller Installation - 2004 Chevrolet Silverado

Today on our 2004 Chevy Silverado, we'll be installing the Tekonsha Prodigy P2 brake controller, in conjunction with the Tekonsha plug-in wiring adaptor for electric brake controllers for General Motors products, part number 90885-3015P. to begin with, we'll go ahead and locate and area where we want to mount the brake controller. In this particular case, we're going to use a small pocket that's part of the dash, and put two holes up into it, and use the metal bracket that comes with the kit to mount the brake controller. Now to start with, we'll go ahead and hold the bracket up and mark our locations where we need to drill. Now to mount the metal bracket, we went ahead and got a couple machine screws and nuts to go ahead and mount it. These are not supplied with the kit, and you will need to get them separately. more


Watch Video

6/26/2013 8:53:38 AM



Trailer Brake Controller Installation - 2000 Chevrolet Silverado- Video

Trailer Brake Controller Installation - 2000 Chevrolet Silverado

Today on the 2000 Chevrolet Silverado, we're going to install Part #39510 from Tekonsha. This is a Voyager brake controller. The first step is actually put a connector on the back of the truck. The part we're going to use to do that will be 37185. The brake controller and adapter cable also come in the package, Part #39510-3025-p. Now, we'll start off by installing the bracket onto the bumper. more


Watch Video

6/11/2012 9:23:27 AM



  1