Jeep Transmission Coolers Installation And Review Videos

  

Derale Series 8000 Plate-Fin Transmission Cooler Kit Installation - 2018 Jeep Grand Cherokee- Video

Derale Series 8000 Plate-Fin Transmission Cooler Kit Installation - 2018 Jeep Grand Cherokee

Ryan: How's it going Ryan here at etrailer.com. Today on our 2018, Jeep Grand Cherokee, we're going to be taking a look at and showing you how to install the Derale series 8,000 Plate-Fin Transmission Cooler. Jeeps are very versatile vehicles and can be used to get a little bit of everything done. While some people may just run around town and run their errands in them, others may use them to do a lot of towing. That's where the Transmission Cooler is going to come into play because doing all that towing is going to put some extra strain and work on your transmission and that's one thing you're always going to have in the back of your mind is you're towing your trailer down the road, knowing that your transmission could potentially overheat and leave you stranded on the shoulder.Now the way this is going to help cool, your transmission fluid is very simple. Warm fluid is going to come in through one side and that fluid is going to travel across, see small plates over to the other side. more


Watch Video

9/26/2019 1:12:47 PM



Transmission Cooler Installation - 2005 Jeep Liberty- Video

Transmission Cooler Installation - 2005 Jeep Liberty

Today on our 2005 Jeep Liberty we're going to review an install of the Derale Series 8000 Plate-Fin Transmission Cooler Kit, part number D13502. Here's what our cooler will look like once it's installed. These coolers are typically installed when hauling heavy loads, or possibly even towing a heavy load, to keep the transmission temperature down to prevent the excessive heat-related transmission failures. The cooler itself is approximately 11" long, and 7" tall. It's about 1" thick, so it's compact enough that it'll fit here behind the manufacturer's grill in the air flow for optimum cooling. One of the really nice features about this cooler is it can be an add-on to a system that already has a manufacturer's cooler, or added to a system that doesn't have a cooler for additional protection for your transmission. Making it an ideal use, as in this application, for an add-on system. more


Watch Video

7/6/2015 1:31:06 PM



Transmission Cooler Installation - 2006 Jeep Commander- Video

Transmission Cooler Installation - 2006 Jeep Commander

Today on our 2006 Jeep Commander we'll be installing the Derale Series 8000 plate-fin transmission cooler kit, part number D13503. Note, we'll be using the Derale snap-in radiator fitting to make our connection, part number D13035. Now let's go ahead and begin our install. First we'll need to gain access to the transmission cooler lines. To do this we're going to remove the front grill assembly. To remove the front grill assembly there are a total of six push pin fasteners across the top that will need to be removed. The remove the push pin fasteners we'll use our flat blade screwdriver to pry up in the center of the fastener and then remove the fastener completely. more


Watch Video

1/29/2015 1:15:57 PM



  1