Chevrolet Avalanche Transmission Coolers Installation And Review Videos

     

Derale Series 9000 Transmission Cooler Installation - 2003 Chevrolet Avalanche- Video

Derale Series 9000 Transmission Cooler Installation - 2003 Chevrolet Avalanche

Today, in the Chevy Avalanche well be installing the Derale Series 9000 Plate-Fin Transmission Tool Kit, part number D13611. To begin our install, well first go ahead and open the hood. Then remove the three push-pin fasteners going across the top of the engine bay. To remove these fasteners well use our flat blade screw driver and pry out on the center of the fastener and then completely remove it. Next, using a plastic pry tool or a flatbed screwdriver, and begin working the front clip off as itll unlock the fasteners underneath. Starting on the corners first and then working our way towards the middle. more


Watch Video

1/26/2015 10:21:23 AM



Transmission Cooler Installation - 2005 Chevrolet Avalanche- Video

Transmission Cooler Installation - 2005 Chevrolet Avalanche

Today on our 2005 Chevrolet Avalanche, we'll be installing the Derale Transmission Cooler, part number D12906. We'll also be using the Derale Universal Mount Kit, part number D13002 and the GM Radiator Adaptor, part number D13035.Now our truck has had some modifications so the removal of the grill is different than normal, so we will not be showing it. With our grill out of the way, we'll go ahead and test fit the cooler.After finding a good spot for our cooler, using a couple of bolts and nuts we purchased separately, we'll attach the Derale brackets to the cooler. At this point, we want to leave the brackets loose until theyre mounted to the vehicle. We can go ahead and attach the rubber line to the cooler as well using two of the worm clamps. It also may be necessary to use some transmission fluid as lubricant to get the line around the fittings.We can now tighten down the worm clamp securing the rubber line to our cooler. more


Watch Video

3/26/2013 5:20:58 AM



  1