Chevrolet Spark Custom Fit Vehicle Wiring Installation And Review Videos

     

Trailer Wiring Harness Installation - 2014 Chevrolet Spark- Video

Trailer Wiring Harness Installation - 2014 Chevrolet Spark

Today on this 2014 Chevrolet Spark, we're going to show you the T1 vehicle wire and harness with a 4-pole flat trailer connector, part number 118575 from Tow Ready. Now when we do need to use it, we just simply pull it out and shut the hatch on it. The door seal's thick enough when you close the latch, it's not going to hurt the wire. Just stay away from that, that will cut the wiring, you'll have to start all over. Leave it like this and shut the hatch. You should have enough to go down to your trailer. more


Watch Video

9/30/2015 12:51:30 PM



Trailer Wiring Harness Installation - 2013 Chevrolet Spark- Video

Trailer Wiring Harness Installation - 2013 Chevrolet Spark

Today on our 2013 Chevrolet Spark we're going to install part number: 118575 from Tow Ready. This is the T-1 vehicle wiring harness with four pull, flat trailer connector. All right, to start of we need to go ahead and open the back hatch and get access to our wiring behind the tail lights. We'll also need to remove the floor covering - there's not much to it. All right, next we're going to go ahead and loosen up our side panels here. We're looking at the driver's side for the plastic fastener we have to remove here, a Phillips head screw here, and a couple more plastic fasteners here. Use a trim panel tool; it works best on these fasteners. To get us started to pull it out, it seems to work best to go ahead and pull it this way. You'll get access behind our wiring. more


Watch Video

12/18/2014 5:19:42 PM



  1