bing tracking image

2006 Ford F-250 and F-350 Super Duty Front Receiver Hitch Installation And Review Videos

     

Draw-Tite Front Mount Trailer Hitch Installation - 2006 Ford F-250 and F-350 Super Duty- Video

Draw-Tite Front Mount Trailer Hitch Installation - 2006 Ford F-250 and F-350 Super Duty

Today, the 2006 Ford F350 Super Duty, we're going to review and install the draw tight front mount trailer hitch receiver, part number 65022.This is what the hitch looks like once installed on our truck. What's really nice is the appearance of it, it all sits behind the bumper here, so it has a nice clean look and there's nothing sticking out.We have a standard two inch opening right here, which is great for a variety of accessories out there, such as a winch, that you can plug into here. Certain snowplows will plug into your front and work with that as well.We'll take a look at the side of the receiver here. You can see it uses a standard five eighths diameter hitch pin here, or your favorite locking hitch pin.You'll notice that the smaller diameter hole here, this is designed to work with the J Pin anti rattle stabilization pin for certain accessories that do not have their own anti rattle device.Now this is really intended for a winch being installed on the front of this here, and we'll cover the ratings for that. This is going to be .. This is going to have a maximum winch line pool of 9,000 pounds, and then a cargo capacity, which is the weight pushing down on the hitch this way, it's good up to 500 pounds.A couple of other unique ideas to use this hitch with, is actually use your ball mount you pull a trailer with, put it in front, and that way you can steer your trailer into tight corners or tight areas wherever you go park your trailer at. more


Watch Video

12/14/2018 3:22:28 PM



Front Mount Trailer Hitch Installation - 2006 Ford F-350- Video

Front Mount Trailer Hitch Installation - 2006 Ford F-350

Today on our 2006 Ford F-350 we're going to take a look at and also show you how to install the Curt Custom Front Mount Receiver Hitch, part number 31114. Now here's what our hitch is going to look like installed. As you can see it's a pretty nice looking hitch. It sits right here in the center of our already existing opening in our truck, so we don't have to worry about cutting or trimming anything there. This is going to be a 2" by 2" receiver tube opening, so there's going to be a great deal of accessories available for it, including your snow plows, some people will put front-mount cargo carries on it, winch mounts. It shares the same 5/8" diameter pin hole here, so any of your Class III accessories will work out fine. more


Watch Video

1/11/2017 3:35:10 PM



  1