bing tracking image

2012 Ford F-250 and F-350 Super Duty Front Receiver Hitch Installation And Review Videos

     

Best 2012 Ford F-250 and F-350 Super Duty Front Hitch Options- Video

Best 2012 Ford F-250 and F-350 Super Duty Front Hitch Options

Here are our best two hitch options. Here on top we're going to have the Draw-Tite. Here on the bottom we're going to have the CURT. Now in my opinion, as far as which hitch I would pick, it would be the Draw-Tite. It's going to work well with either the two-wheel drive or four-wheel drive model vehicle. It's going to stay completely hidden behind the air dam on the vehicle and it's going to do everything you need to do. more


Watch Video

3/5/2019 12:02:36 PM



Front Mount Trailer Hitch Installation - 2012 Ford F-250 - Curt- Video

Front Mount Trailer Hitch Installation - 2012 Ford F-250 - Curt

Today on our 2012 Ford F-250 Super Duty, we're going to review and install the CURT front mounted trailer hitch part number C31018. Now with our hitch installed, here's what it'll look like. As you can see the majority of our hitch is covered behind the front air dam. The only thing we really have exposed is the side bracket. This is a full steel and welded construction. It's got a nice black powder coated finish and when installing your pin and clip, you just need to reach behind the air dam to access the pre-drilled 5/8" inch pinholes. more


Watch Video

5/12/2015 10:48:04 AM



Front Mount Trailer Hitch Installation - 2012 Ford F-250- Video

Front Mount Trailer Hitch Installation - 2012 Ford F-250

Today, on this 2012 Ford F-250, we're going to install part number 65049 from Draw-Tite. This is what the hitch looks like when its installed on the vehicle. Next, we'll give you some measurements to help you out when selecting some accessories. From the top of the receiver openings down to the ground should be about 15-3/4 inches and from the center of the hitch pin hole to the edge of the bumper in this case, we measured out to the license plate, its going to be about 5-1/4 inches. Now, we'll go ahead and show you how the hitch is installed. First thing you need to do is go ahead and remove some bumper brackets there at the end of the frame. more


Watch Video

7/4/2013 9:39:14 PM



  1