Custom Fit 2001 Chevrolet Silverado Accessories

According to my research, AL-KO 8490 references an AL-KO hub for 3,500 lb axles with a 10 x 2-1/4" drum and a 5 on 4-1/2" bolt pattern. For a drum assembly that will work with these hubs I recommend taking a look at the Electric…

I have included a couple of pictures that show where to plug in a brake controller on a 2001 Chevy Silverado. You are looking for the black junction box located towards the back left corner on the drivers side. Remove the cover and you will see a…

The dimensions you have are nearly identical to the CE Smith #CE19504-2 you looked at. However, these are designed for 14" wheels. For 15" wheels you would need the Fulton #F008585-2. These are slightly longer and taller at…

Not confusing at all. I took a look online and the 2001 Silverado 2500HD has a 12,000 lbs bumper pull towing capacity and a 15,200 lbs 5th wheel towing capacity. It's just two different capabilities of the truck. The extra weight of a 5th…

The grease cap part number that you referenced cross references to a drive in cap with a 2.44 inch outside diameter. If you have a standard cap then the Grease Cap, 2.44 inch OD Drive In, item #RG04-060, is the correct part. If you have a grease…

If your RBW Lil Rocker has ISR spacing (22" front to back from center of the feet) then you can use the Curt Custom Fifth Wheel Installation Kit for Chevy/GMC #C16418-204. If not then you would need to reach out to the manufacturer of the hitch…

To install a 7-Way wiring connector at the rear of your 2001 Chevrolet Silverado without a factory 7-Way or a factory 4-Way connector, I recommend using the 7-Pole and 4-Pole Trailer Connector Socket and wiring harness, #HM40975-11998. You can the…

I was able to get a dimension sheet from my contact at Curt for the Curt Hitch part #C15800 that you referenced. See attached pic. I also attached a set of the installation instructions for this hitch.

I found an old wiring diagram for your now discontinued Power Gear 500210 control panel and it really helps show how things are supposed to work. There is a red wire running to the three jacks, the dump valve, and the float valve from the solenoid.…

You are correct, the 5.30x12 is the SAE nomenclature, while the 145/80-12 is the closest metric equivalent. The two are approximately the same size with the 5.3x12 being about a tenth of an inch narrower and a quarter of an inch taller than the…

The Kodiak Disc Brake Kit #K2HR35DS that you referenced will fit a #84 spindle and requires inner bearing #L68149 and outer bearing #L44649. The kit includes the races but does NOT include the bearings or seal, but we offer these separately as part…

First I want to congratulate you on wearing out a trailer hitch. You must do some serious towing! To answer your question the Curt Hitch part #C15312 that you referenced is an OEM replacement hitch for your 2001 Chevy Silverado 2500HD. You would be…