Custom Fit 2005 Chevrolet Silverado Accessories

Yes! I went ahead and attached the installation instructions of the Demco Underbed Rail and Installation Kit #DM8551004 (Demco part 8551004) to this answer.

I really like the Curt Trailer Hitch Receiver #C14108 for your 2005 Chevy Silverado 2500HD Short Bed because it has a hidden crosstube and is a Class IV rating so it's nice and sturdy for up to 10K trailers or 12K trailers if a weight…

Assuming that you are using the RP50064-58 install kit from Reese the install involves to main components. First, the brackets. The brackets attach to the frame rail below the bed. The other main component, the rails, sit in the bed and bolt the…

2005 Silverado models that came with a factory 7-Way plug, meaning 6 blades running around the edge and a round pin receptacle in the center, would not require additional connections to be made in order for the brake controller to function. If your…

I have included a link to the B&W trailer hitch receiver #BWHDRH25182 and step 4 will provide you the torque specifications needed.

The Curt #C15323 installs to the underside of the frame members as shown in the provided diagram. You'll want to make sure the rear frame members where the hitch would install are still sound. Some surface rust is normal, but if it's any…

Yes, the Curt Trailer Hitch Receiver #C15323 will fit on your 2005 Chevrolet Silverado 1500. This receiver is designed to fit the standard factory bumper but does not screw into the bottom of the bumper.

The 2 bolts that go into the bumper portion of the Curt Trailer Hitch Receiver #C14332 are a required part of the installation. Curt will void any warranty on the hitch if it is not installed properly as per their instructions. There is no way to…

Disc brake actuators like #T4747200 do not have a check valve in them or a device to keep pressure in the system like drum brake actuators do. On a drum brake actuator there is a check valve inside the master cylinder that regulates the amount of…

The correct rear Torklift tie downs you need for your 2008 Chevy Silverado 3500 are the part #TLR3503 since you have the Torklift hitch #TLC1205.

When hardwiring a 7-Way to your 2005 Chevrolet Silverado, like part #PK12-707E, you will want to connect the following functions to the following pin locations: 1 o'clock - 12V Power 3 o'clock - Right Turn/Stop 5 o'clock - Brake…