Custom Fit 2010 Chrysler Town and Country Accessories

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

For your Homestead trailer with a 3,500lb axle I recommend the Dexter Trailer Axle Beam with E-Z Lube Spindles #7359765. This is a straight axle that shares your same hub face measurement. The spring center on this axle is only 80" so you might…

For a complete towing setup for your 2010 Chrysler Town and Country I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver #75579 which is a Class III hitch with a 2 inch receiver opening. To install wiring I highly recommend the…

In the installation video for Draw-Tite hitch #36455, which I have linked for you at right, you can see the position of the installed hitch at the 1:20 mark. This shows an underside view of the 2011 model year's rear bumper after hitch…

Basically a lot depends on what you will be using the hitch for. If it is just for accessories such as a bike rack or cargo carrier than for the most part you will be fine with a Class II trailer hitch. If you will be towing then I would go with the…

You can use the 4-way bracket part #18144 to hold the 4-way connector of the Curt harness part #C56333. This would attach to the bottom of the rear bumper and would do a great job to hold the 4-way when not in use so that it's not dangling behind…

Thank you for your recent wiring harness purchase from etrailer. This harness is a plug-and-play type that uses connectors, rather than all separate wires that need to be spliced, for most of its connections to your Town and Country's wiring. The…

I took a look at an online copy of the owner's manual for a 2014 Chevy Traverse and you are correct that the maximum towing capacity with the trailer towing package is 5,200 lbs. This is different than the GCWR, which is 10,250 lbs for a 2WD or…

Your 2010 Chrysler Town and Country minivan can be equipped with either a 1-1/4-inch Class II or a 2-inch Class III trailer hitch. All options are shown on the link provided. I suggest the Class III hitch #13364 from Curt; this is the most popular…

Yes, the Curt Trailer Hitch Receiver #13364 will still fit a 2010 Chrysler Town and Country even if it has the Stow&Go seats. We actually had the chance to install this hitch on the exact same style that you're talking about and I've…

It can be somewhat common for mounting holes to not line up properly when speaking of a trailer hitch like the etrailer Trailer Hitch Receiver part #e98854 which is a fit for a 2009 Chrysler Town and Country. This can be caused by either faulty…

The etrailer.com Trailer Hitch Receiver #E98854 is compatible with the Stow and Go seating in your 2010 Town and Country. It is a very easy installation and in many cases doesn't require notching the fascia. If your specific vehicle does, this is…