Custom Fit 2014 Ford Explorer Accessories

The best way to determine if your Explorer is equipped with the tow package is to check with your Ford dealer. They should be able to run the VIN and be able to tell you exactly how the vehicle was equipped. I'm assuming you're needing the…

Yes, you should go with a dual stage like the MB Sturgis 2-Stage Propane Regulator part #108220 for vertical or part #108221 for horizontal because it can be adjusted to a 12" water column outlet. In order to do this you will need to remove the…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

I have a solution for you, but you won't be able to use both the 7 way and 4 way plugs on the Hopkins #HM40975-11998 at the same time because the cover flaps do not allow for both to be open simultaneously. In order to plug both your 7 way and 4…

For a trailer tire, the narrowest option rim for any given tire is going to be the best option. For a 205/75-15, the best option would be a 5 inch rim. The reason that narrower is better is because it provides more support for the tire. Since trailer…

Since you intend to one day pull a travel trailer I recommend the Tekonsha T-One Vehicle Wiring Harness with 7-Way Trailer Connector #118272 on your 2018 Ford Explorer. The travel trailer will likely require a brake controller due to the weight of…

According to the folks at Tekonsha, you'll want to use the #118272 7-way connector that you'd looked at. The harness is compatible with all models of the 2017 Ford Explorer, but you might need to install some fuses in the fuse box under the…

I have an install video linked to this page that shows the Curt Triflex part #C24VV being installed on a 2020 Ford Explorer with the harness part #C51322 which would cover the same exact process as the P2 part #90885 with the #3035-P that you…

The correct install harness for a Curt brake controller in a 2014 Ford Explorer is the part #C51322. The harness you are looking for on your vehicle will be under the dash to the center towards the center console. I attached an install video that…

For installing the Tri-Flex brake controller part #C24VV in a 2013 Ford Explorer the correct install harness is the part #C51322. I confirmed this with Curt as a fit for your vehicle. he Ford Explorer and Mercury Mountaineer have 6-pin connectors…

Hey Aaron, If your 2023 Ford Explorer XLT has a factory tow package connector back at the rear of the vehicle then you can use the Curt T-Connector Vehicle Wiring Harness #C55664. If you don't have a factory tow package connector then you'll…

That is the correct plug for the Tekonsha Plug-In Wiring Adapter #3035-P under the dash of your 2021 Ford Explorer with factory tow package. I have linked a video of an installation we did with the Curt Triflex #C24VV and Adapter #C51322 and you can…