Custom Fit 2015 Mazda 3 Accessories

You can use an adapter like the Brophy #HTAD in order to use 2 inch hitch-mounted accessories with the 1-1/4 inch receiver on your 2002 Mercury Mountaineer. An important factor to keep in mind when using this or any other hitch adapter is that it…

As you mentioned, both the Curt Class I #C11377 and the Draw-Tite Class I #24912 Trailer Hitches are confirmed to fit your 2015 Mazda 3 Sedan Grand Touring. Both hitches will work with all models of the Mazda 3 Sedan, however the Draw-Tite #24912, as…

According to the owner's manual for your 2018 Mazda 3, "Your Mazda is not designed for towing. Never tow a trailer with your Mazda." However, if you choose to ignore this recommendation then you will want to use the Curt Trailer Hitch…

Using snow chains on 4 tires would provide more traction than if you were to use snow chains on 2 tires, but whether or not it is safe to do so is entirely up to your vehicle manufacturer. Some vehicles are only permitted to use chains on either the…

For your 2018 Mazda 3 Sedan with LED lights, I recommend the Tekonsha T-One Vehicle Wiring Harness #118405. This custom harness is confirmed to fit your vehicle and will install by connecting directly to existing ports located behind the driver and…

The horizontal mounting plate that mounts to the frame of your vehicle on the #41947 is 2-13/16" wide and the mounting plates themselves are 11-9/16" tall. The holes on the horizontal mounting plates are 3/4" and 1-1/4" in…

There is definitely a trailer hitch that is designed to fit your 2019 Mazda 3 hatchback, the Curt Trailer Hitch Receiver #C98BR, which is a Class I hitch that has a 1-1/4 inch receiver and is a bolt-on installation so no drilling is required. Since…

If you connect the trailer brake light circuit to the trailer brake circuit your brakes would lock up immediately since 12 volts is max braking voltage for trailer brakes. You'd need a brake controller that can vary voltage so that you can apply…

I went out to the warehouse and pulled Yakima shock for Rack and Roll trailers #Y08110 to measure it. From the center of one eye to the center of the other is approximately 12-7/8 inches.

Thanks for the photo, and your 2021 Mazda3 2.5 Turbo sedan should have 215/45R18 tires, though I do recommend verifying. If so, for limited wheel well clearance you will want Class S compatible snow tire chains, and for that I recommend an option…

According to Tekonsha, this wiring harness fits the 2014-2018 Mazda 3 Hatchback. So yes, you can use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118405 on your 2015 Mazda 3 Hatchback. This wiring harness will plug directly…

I also confirmed with my contact at Yakima that the Heavy Duty Shocks #Y08110 are not recommended for the 66 inch Rack and Roll Trailer #Y08106. The shocks should only be used to upgrade the 78 inch trailer #Y08107. In order to use the Heavy Duty…