Custom Fit 2021 Nissan Rogue Accessories

The 2021 Nissan Rogue's have what's called rear automatic braking. It automatically applies the brakes and blares a screeching alarm if something is behind you. This is a great safety feature if you are backing up and someone walks out but it…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Once the Curt #C13204 is installed, the sensors located in the center of the under bumper area will be obscured by the square hitch receiver tube. However, there are sensors under the right and left side of the bumper and those will function just…

Though this does look remarkable similar to the Thule Hitching Post Pro #TH934XTR, to my knowledge this rack was never offered with just a 2" shank as it used a 1-1/4" shank with a 2" adapter, so I can't say exactly which model you…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

I contacted the manufacturer about the size of the screws for the 2" Shank Adapter for Yakima Ridgeback or FullTilt Bike Rack - Manufactured after November 2015 #8880612. The manufacturer said that the screw size is (1) M8x12 bolt and (2) M5x10…

The Torque Specification is found in the installation instructions on our product page on the etrailer #e98846 receiver hitch. A Torque Wrench #PT87ZR would be the type that you would need to achieve that rating.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Drilling is not required, and you will not need to trim or cut any part of the bumper fascia on your 2023 Nissan Rogue to install either the etrailer or Curt trailer hitches that fit. The hitches that fit are the following part numbers: - etrailer…

Thank you for the information! For an all-in-one system we have the SeaSucker Surfboard Carrier #298-BX1806. This uses powerful vacuum cups (rated for 210 lbs pull strength per cup) to secure to your roof and it comes with pads and tie-downs to…

I have a solution for you, and in some complete roof rack kits the Yakima Jetstream crossbars #Y00425 will come with the Adapter and Seat for Yakima JetStream Crossbars - Qty 1 #8880637. However, if you're adding crossbars to existing towers then…

You can use an anti-rattle device such as #SHP2082 as long as the shank on the bike rack is hollow. If it is not hollow then use anti-rattle device #MPG908. I have included a link to a video review of device #MPG908 for you. It is also possible that…