Custom Fit 2022 GMC Sierra 2500 Accessories

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

Hey Jerry, we do have one wet bolt that is long enough to be used with the Correct Track lift kits part #RR23QX with the part #LC126197. This is about half an inch longer than standard suspension bolts.

Yes, they will so long as the GM factory TPMS valve stems you're using have a 0.453" valve stem. The Sendel Aluminum Mod Trailer Wheel item #AM22646 you were looking at requires a 0.453" valve stem. Additionally, you'll want to…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

Those are good questions, and let's go ahead and start with the correct helper springs; since you have axles that are just over 5,000 lbs you do want the heavier option: - SumoSprings Trailer Helper Springs - 5K to 8K - Overslung #SS26MV As for…

Yes, you will want to use a sliding fifth wheel hitch since your 2022 GMC Sierra 2500 has a standard sized bed. This will help prevent the nose of your 5th wheel from coming into contact with the cab of your bed when making turns. The only exemption…

What I think you are asking is, how to set-up the hitch with the Rhino Box as the narrow width of the pin box does not engage the capture plates on your Demco Hijacker 5th Wheel hitch. What you are missing is the Demco Hijacker Autoslide Locking…

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

Yes, all you'll need is the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes #DM76FR to make your new camper's Lippert Rhino Box compatible with your Demco Hijacker #DM8550034 5th wheel hitch.

The Dexter 072-078-00 is a 2,200 lb capacity leaf spring. You can use a higher capacity leaf spring, however it won't increase the capacity of your trailer as the axle is still rated for that max capacity of 4,400 lbs. My recommendation for a…

Thank you for providing those measurements! Since your 5th wheel hitch height is 47 inches, subtracting the bed height of 39 inches gives us the 8 inches you mentioned which is technically the setting you would need to use on your Demco Hijacker…

The height adjustment for the Demco Hijacker Autoslide 5th Wheel Hitch with Slider - Ford Super Duty Prep Package #DM8550024 (18,000 lbs) and #DM8550038 (21,000 lbs) is found in the "Side Rail Assembly Instructions" of the hitch. I have cut…