Land Rover Discovery II Vehicle Tow Bar Wiring

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

Hey Steve, thanks for reaching out again! Hopkins doesn't have any exceptions for their Wiring Kit #HM39VR which normally means it's compatible, but even though this is easier to install than a lot of the other options, from my experience I…

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

Hi Russ; you pretty much have everything you need right there with the exception of a few parts. I'm going to go ahead and list it all out here with links to make it easy for your to manage. You will need the following: -etrailer Invisible Base…

Yes, it will! You'll want to cut off the 4-way connector of the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR and install the 6-way connector that comes with the Curt Tow Bar 7-Way to 6-Way Coiled Adapter Cord w/ 6-Way Socket…

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

Hey Eddie, thanks for reaching out! It looks like you were already able to get the following parts in an order: - Roadmaster Direct-Connect Base Plate Kit #RM77ZR - Roadmaster Nighthawk All-Terrain #RM-676 - Smart Diode Kit #RM47ZR - Tow Bar Cover…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Thanks for reaching out, Todd! The flat tow wiring kit I recommend for the LED tail lights on your 2024 Jeep Gladiator is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit, and the correct part depends on if your Gladiator has the ParkSense…