Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These premium mud flaps are easy to install and digitally designed for a perfect fit. Protect your Chevrolet Silverado 3500 and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Features:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless.
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors, Steven here with etrailer.com. Today we're looking at these WeatherTech mud flaps. It's a no drill quick install with a digital fit front and rear set. Now folks, these are vehicle specific. Make sure you're using our fit guide, top center of our homepage, etrailer.com. Enter the year, make and model, cab style, bed length, that kind of stuff, possibly even dually or non dually.
Those kind of questions to get the right parts the first time. In this particular case, these fit a 2024, I'm sorry, 2020 through the years of 2024, both the Chevy Silverado 2500 and 3500 series. The non dually on the rear set, so meaning the rears here, these do not work with a dual truck. As you can see, they're not wide enough. Now if you need the duals for this specific vehicle, I put that item number up on the facet above my left shoulder here.
It's part number WT23ZJ. You can purchase that separately. Now getting into it, these will install very, very quickly with the included Torx T15 bit. Now, I went ahead and opened up one of each of these bags and let the other ones included. So each set, the front and the rear that you're gonna get will come with two clips per set and one Torx bit per set.
So that's what you're gonna get. Now there's no drilling whatsoever or tire removal to install these. So yeah, right, it's super simple, right So five minutes, you should have these easily installed. What you're gonna do front or rear is you're simply going to use that T15 Torx bit head and you're gonna remove three factory screws per the instructions that come with the set. And you're gonna take those screws off, take off whatever piece is already there, I believe it's just holding on a factory plastic fascia, if you will, right behind the tire.
This will go up in place. You'll put those three screws you took out right back into place. And then this little square hole up here, I don't know if you can see with my black shirt there. There you go. This little square hole up here, that clip is actually gonna go through that and clip onto the piece right behind that hole. So again, these have been perfectly molded from high quality thermoplastic resin, and they have been laser measured to fit precisely on your vehicle. Now folks, keep in mind I said these are a custom fit. Everything can change over time. So if you have a newer vehicle than what's here in the video, there's a good chance it could possibly fit. Again, just check that fit guide. Now again, you're gonna get two fronts and two rears, and they come in their individual boxes. But if for some reason you mix it up, you shouldn't, but if you do, the fronts have this little dog ear that I'm calling it on the sides and the rears do not have that dog ear on the side. These are made here in the USA, very, very nice product. Again, there's a closeup version there of these clips. Again, you're getting two clips and one bolt or one Torx head per set. So again, I just left one set in the packaging there, just so I can reuse that one. Well folks, that's gonna wrap it up for these WeatherTech mud flaps. Again, a no drill, super fast install for your front and rear. I'm Steven. Thanks for watching and have a great day.
Average Customer Rating: 4.8 out of 5 stars (1381 Customer Reviews)
These premium mud flaps are easy to install and digitally designed for a perfect fit. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.Just like the description says...easy install, no drill, digital fit. Looks like they came with the truck. Highly recommend.
Works has advertised
Great product easy to install took me about 15:00. Mud guards looks good on my 2023 silverado hd.
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
Took a little effort to get it to match up with the plastic wheel well fender flares but once I did I have not had any issues. Looks somewhat subtle but is pretty effective at stopping thrown debris onto the paint.
Great service item was shipped and received quickly. Mud flaps were easy to install.
For someone who is "old school" and reluctant to install plastic onto a machine, I'm impressed with the ease of installation and durability so far. I've put about 7500 miles on them without an issue. And thanks to Etrailer for carrying great products and providing great info to consumers. You folks have a great Business model!
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
Great product, easy to install, I didn't find the instructions, but was easy to figure out. I would recommend this product
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
East install on 2023 Thor Compass 23te Motorhome. Fit perfectly. Place some tape on a open end wrench to hole the nut on and you are good to go.
Weather tech always fits and looks good
Good quality. Arrived quickly
Easy to install.
I ordered Weather Tech mud flaps for my GMC Sierra 1500. The front flaps were easy to install by using existing fasteners installed on the truck by GMC. The rear flaps were slightly more challenging requiring the placement of clamps (integral to the flaps) on the rear fender. The entire installation of all flaps required about 45 minutes. they look great and they will protect my fenders from being damaged by road debris.
Fit my 2020 Honda Ridgeline perfect! Easy to install with easy to follow instructions. Match oem black plastic great. Really complete the look of truck. Very happy customer.
I ordered a set of weathertech no drill mud flaps for my new 2022 Colorado and they fit great and easy to install. Well after a couple of weeks I put on GM flares so I had to order another set for flares. Same thing excellent fit and easy install. Quick shipping and good service.
Seems like a solid product. Made in the USA. The instructions were a bit off. So I jumped on the etrailer YouTube account, found the install video. Issue solved. I will say I'm more impressed with etrailer than weathertech. However, nice fit and finish. I would recommend this product.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.