2021 Chevrolet Silverado 2500 Bug Shield

Hi Thomas, yes the etrailer Hitch Receiver Lock #e98881 will work great with the Curt Trailer Hitch Receiver #C13416 which will also fit your 2024 Toyota RAV4 Hybrid.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey there Robert, looks like you're on the right track. The Steel Dual Wheel with Offset - 16" x 6" Rim - 8 on 6.5 - 4.77" Pilot -…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Ron, thanks for reaching out! We have two different steering stabilizers for your motorhome on a 2018 Ford F-53 chassis; the Roadmaster Reflex and the Roadmaster Exact Center. The Exact Center was supposed to be an upgrade to the Reflex but…

For your 2018 Ford E-450 RV we actually have the WeatherTech #WT26DV. These are a custom fit for your vehicle.

The Pace Edwards Bedlocker Retractable Hard Tonneau Cover w/ Explorer Series Rails #311-BED7936 and the Pace Edwards UltraGroove Retractable Hard Tonneau Cover #311-KED7936 are essentially the exact same thing with just a different name. The only…

The Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43002XT actually only fits on the black TracRac rails which have a raised section for the base to fit on (see attached), as opposed to the RetraxONE XR rails which essentially have a T-Slot. The…

So first of you are going to need the Curt Trailer Hitch Receiver #C23WR which I see you already found. And I do understand your confusion with wiring since you would think since it did not come with the receiver you would not have the factory tow…

Yes, there is a hitch available that will utilize the bumper cutout on your 2024 Jeep Grand Cherokee L. For that I recommend the Curt Class 3 Hitch #C96NR. This will install directly behind the factory bumper cutout. Once the hitch is installed you…

The GearSpace 34 Enclosed Cargo Carrier #HGK826 that you referenced actually has locks built into the enclosure to keep the contents of it secure so you would not need to purchase any additional locks. If you wanted to lock the carrier to the hitch…

While we don't offer a version of the GearSpace 34 Enclosed Cargo Carrier #HGK826 that has the lower tube you can also purchase the Flat Twin Tube part #H01373 with it so that you can lower the height of the carrier. This…