Summer Starts Here - Save up to 70%
Part Numbers: SB324-080,31367
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.
Features:
Specs:
Notes:
This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (57 Customer Reviews)
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.A good install! A bit of trimming for my application , but the bolt holes lined up perfectly. This front hitch was not specifically for a Lexus GX 460 but I decided to try it. There is a small area of lower bumper plastic that had to be trimmed. The hitch was pushing up against it before it was high enough to be in place. Upon trimming that area, it went in perfectly. If trimming the lower plastic is not for you, probably best to pass. However for my use, it works well. It is a stout piece, very strong. I added a pic with a red line to show where the trim needs to be.
This little plow has been perfect for a Jeep Wrangler. I used it all winter and it kept the driveway clear, no complaints.
Installed on my 2012 Lexus GX460. Perfect fit once I cut the center section of the lower plastic area for it to fit. Also had to trim the bottom splash guard and bend in the L brackets that hold it on. Took me about 2 hours. Very happy with the outcome. Now can mount snow blade for the driveway clearing…or any other hitch items.
I had great personnel service, and the Hitch Receiver is solid. The material is heavy duty, and the welds are first class. Second item I've bought from etraier and both time I have been 100 percent satisfied. I go offroad and I use the hitch to hold a 2nd spare tire. I just got back from a 1,500-mile road trip to the Naveda mountains, in rough terrain, in 7-degree weather and many feet of snow and it held perfect. American made is the only way to go when your life depends on it.
Fit perfectly on my 08 Lexus GX470. Super excited for the additional functionality of having a front hitch. I move trails around my tight yard but also will enjoy putting a cooler on the front cargo rack, and having my hitch mounted winch up front. So versatile.
It would have been nice if the gentleman who sold me my snow plow would have told me that I needed a drop down hitch instead of a straight hitch, which makes a big difference when trying to plow.
Okay, first things first. I installed this hitch on a 2006 4Runner, even though the hitch wasn't specifically for that model year (Curt says the hitch fits 2007-09 4Runners). The 2006 4Runner's front tow hooks are angled down, which is a requirement for this hitch to fit (see the picture). One snag I ran into was that the four bolt holes along the top of the hitch didn't quite line up with the bolts on my 4Runner (the holes were not quite far enough apart) so I took the hitch to a machinist who elongated the holes for me. I don't know if this mismatch was a manufacturing defect in the hitch, or whether it was due to the difference between a 2006 4Runner and the 2007-09 models. Once I fixed the hole spacing, the hitch installed fine. Seems like a solid hitch. Planning to use it to push a trailer around when parking it.
David
8/8/2021
This thing is great! Its so much easier to push a trailer around using a front hitch than it is to back it with the rear hitch. I can push this thing up a long curvy driveway with no trouble. Definitely recommended.
I installed this on my 2008 Toyota 4runner in order to back my pop up camper down an inclined very tight drive. It was difficult to use the rear hitch because I did not have enough room to straighten out the 4runner. I did it with the front hitch on the first try! My wife says it saved our marriage! Putting the camper away was the most stressful part of the trip before this. I did need to buy a longer ball hitch of a different height because the front hitch sits lower and further under the bumper. Etrailer quickly shipped exactly what I ordered
Bruce
9/4/2017
I just used it again today, and it is still working great. Glad I got it.
The plow works ok. It's easy enough to get on and off the vehicle. Fatal flaw is the winch strap. I have replaced 3 times in one winter of plowing. If you purchase this product be sure to order extra winch straps!
I love my new front hitch. Shipped ahead of time and easy to install. Works great when moving the boat into the garage.
Great Fitting Hitch for the front of my FJ Cruiser. I needed a solution to re-use a personal plow from another vehicle. Luckily, the plow was able to be converted to a 2" receiver hookup. Using my existing winch for the up/down with a snatch block. Even with aftermarket Warrior Bumper and Skid Plates fit perfectly. Ground clearance not compromised. 6 bolt installation, EASY PEEZY.
Fast and reliable shipping. Quality product and easy install.
*Plastic front piece on bumper bends ever so slightly for tow hitch to fit.
Works well for the price.
I have attached pictures of the Fj with the front tow.
I think this unit will work very nicely for being able to run my winch from either the front or the rear of my FJ Cruiser.
Great product!
The front mount Toyota FJ Cruiser hitch fit perfectly. It took me 30-45 minutes to install. you need a 145mm socket or wrench and a larger socket for the bolts that come with the kit (I used an adjustable). Good clean install using a total of 6 bolts (4 existing and 2 new that bolt to the factory tow points.
Excellent Kit!!! very happy!
Dave R.
9/29/2016
The front hitch works great! I should have bought this sooner!
I love this plow. It works great for our long driveway. This was easy to assemble and easy to take on and off our Honda Ridgeline.
What a value!! I installed this front receiver hitch on my 2007 FJ Cruiser and is was a perfect fit. I planned to use it for a bicycle rack mount when pulling my boat but use it also for a winch mount, access step for under the hood and for trailer handling in tight spaces. Super fast shipping from etrailer.com and great price too!!
Thanks, et!!
Ed
9/30/2013
were you able to keep the grey front skid plate with the front receiver installed. ive been researching but cant get a definite answer. the vid for install doesnt have it on.
Bolt holes did not line up. etrailer was no help. Many unreturned calls and unhelpful emails and unanswered questions, and no solutions offered. Finally gave up. Will probably have to have it welded on.
When they asked me to review it after one year (now), I stated the above to them. Their response was: "etrailer is continuously looking for ways to improve our customers' experience and we take your comments very seriously. Without honest feedback from valued customers like you we would not know where we need to make improvements." But again, offered no help or solution.
Because of my complicated parking configuration I required a front mount hitch. The product came quickly right to my door. Installation on my 2007 Fj Cruiser was so simple and took no more then 30 minutes.
Thanks!
Alexander J.
8/15/2019
Still doing its job of parking the trailer!
I bought this for the front of my 4-Runner to carry a bike rack. I have not used it to tow a boat or trailer, For my use it is excellent.
Chrisg.
6/11/2020
Great - love it
Fit my 2006 4Runner perfectly. Some have had issues installing this hitch on a 2006 4Runner here in the reviews. I purchased this 31367 hitch in February 2019, but did not get around to installing it until today, December 2020. The installation was quick and simple. Removed four nuts connecting the bumper to the frame (but four bolts remain so the bumper stays intact) by using a couple drops of Liquid Wrench (like WD40, but more aggressive penetration) on each to help loosen them with the 1/2" drive breaker bar (about 16" long) and 14mm socket. Then lifted the hitch in place to hang on the bolts and placed the nuts on snug but not tight. The hitch comes with two 24mm bolts that then go through front hitch plates, front vehicle tow hooks, and have a heavy duty rectangular 'washer' used on the under side of the tow hook to bolt the front hitch to the tow hooks. These vehicle tow hooks must be angled down at 45degrees (straight out about 1/2" then down at 45degrees) to match the front hitch mounting plate which is also at 45degrees. As shown, the front hitch has replacement tow hooks welded to it, so you still have hooks after mounting. I then tightened the two 24mm bolts and then the four 14mm bolts. Done in about 45 minutes from box open to box in the recycle bin.
Couldn’t be happy with my purchase. Has been holding up great!!
For 2014 fj cruiser; will not fit until you cut-off the two inside lower mount bolts that do not attatch the front bumper brackets at the end or front of the frame. Not sure why these bolts are there, but may be by Toyota for some other option. Haad to cut-off then grind the remaining remnant f the stud before installation could proceed.
J W.
3/29/2015
Did you use hack saw or some easier method of cutting off bolts. Did you find what use these bolts were mounted for.
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
9/4/2023
Works very well. I use it for mounting bikes in front, mounting a removable winch, and a front basket when I am camping. I had to add a 12 inch extension, the hitch is tucked under quite a bit. This is a very stout set up. No worries for any use.