2018 Chevrolet Silverado 2500 Roof Rack by Yakima

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Features:

• Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
  • Pair with Yakima towers and a fit kit to create a complete roof rack

• Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
  • Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
  • Aero-style bars reduce drag to help maintain fuel efficiency

• Full-length design maximizes space for carriers and accessories
• Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
  • Works with most universal-mount bike, water, snow, and cargo carriers

• Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
  • Simply push down on the SmartFill strips to slide in accessories - no trimming required

• Bottom channels allow for easy installation on Yakima towers
  • Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
  • Etched measurements on bottoms of bars help center rack on your roof

• Lightweight aluminum bars are durable and rustproof
  • Internal JetTruss extrusions provide exceptional bar strength

• Clear anodized alloy finish is corrosion resistant

Specs:

• Quantity: 2 crossbars
• Crossbar weight capacity: 165 lbs
  • Always observe your vehicle's maximum roof load capacity
• Dimensions: 70" long x 2-3/4" wide x 1-1/8" tall
• T-slot dimensions: 7/8" wide x 7/16" tall
• T-slot top opening: 7/16"
• Underbar slot: Full length
• Limited lifetime warranty

The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.

Aerodynamic JetFlow Design

The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.

Strong, Durable Construction

The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.

Hassle-Free Installation

Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.

Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.

Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).

Channel-Mounted and Clamp-On Accessories

JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.

You can also attach most universal, clamp-on accessories and carriers to the bars.

Maximum Cargo Carrying Capacity

The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.

8000430 Yakima Jet Stream Cross Bars - Aluminum - 70" Long - Qty 2 - Silver

Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.

Features:

• 4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
  • Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack

• Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
• Pivoting bases can be adjusted during installation to ensure towers are seated correctly
• Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
  • Also fit RoundBar crossbars with adapter

• Safe and easy installation with DropHook system and included torque tool
  • DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
  • BaseClips attach to hooks in tower assemblies and tighten for a secure grip
  • Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening

• Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
• Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish

Specs:

• Maximum tower load capacity: 220 lbs
• Limited lifetime warranty

The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .

Versatile BarBed

The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.

The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.

The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.

The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.

Adjustable Pitch and Toe Angle

The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.

Secure Installation with DropHook System

The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.

Same Key System Locks

BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.

8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4

Replaces 8000146

These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.

Features:

• Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
• Padded, stainless steel clips provide secure grip on your door jambs
  • Snap onto DropHooks inside towers
  • Protect door jambs from scratches and abrasions
  • Powder coated for durability and rust resistance
• Molded rubber pads fit the contours of your roof
  • Clip onto bottoms of towers
  • Protect roof from scratches and abrasions

Specs:

• Quantity: 4 clips and pads
• Limited lifetime warranty

DropHook System Installation

Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.

The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.

The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.

8006122 Custom Base Clips and Pads for Yakima Base Line Towers