2018 Chevrolet Silverado 2500 Truck Tailgate Lock

I sure do and yes they are! The holes are spaced 1-1/4" apart on center for both the BulletProof Hitches Weight Distribution Shank item #BPH85RR and the Blue Ox SwayPro Weight Distribution System item #BXW2000 so they are indeed…

The Pop & Lock Custom Tailgate Handle with Lock #PAL5400 that you referenced is confirmed as a fit for all models of the 2005 Toyota Tacoma so it would work well for you. This one will key to your truck door key so that the same key…

For your 2009 Silverado, the Pop & Lock Custom Tailgate Lock #PAL8120Q or the Pace Edwards PowerGate Electric Tailgate Lock #311-LK280 are confirmed to fit. I've attached the installation instructions for each as well…

Hey Mike, thanks for reaching out! For your application you'll want to go with the Quad-Fold BAKFlip G2 Hard Tonneau Cover #BAK26305 on your 2008 Ford Ranger. The etrailer Hard Tonneau Cover #e23DR actually doesn't fit…

The Redarc BCDC Charger part #RED36TR can work with your fridge but it wasn't designed to power accessories directly. You could use it to charge your 12 volt battery that is then powering your 3-way fridge on DC mode though.

The Integrated OEM Tailgate Lock #LH-007 will only fit 1500 models of your 2002 Dodge Ram with the Quad Cab. Since you have the 2500 model you need the Pop & Lock Custom Tailgate Lock #PAL3300 instead. If you'd like to…

The Tonneau Cover Adapter Kit #Y01155 is only a fit for the integrated tracks on Retrax XR Series, Embark LS and Pace-Edwards UltraGroove (except for 2004+ F-150) tonneau covers. While your Roll n Lock tonneau cover does have t-slots for some…

The wiring harness you will need to access to install the Pop & Lock Custom Tailgate Lock part #PAL8200 on your 2009 Ford Ranger will be under the passenger's side kick panel. Once the kick panel is removed you will need to…

Hi Bryant, It's definitely a smart idea to check and make sure, and I can verify for you that yes, the Curt Trailer Hitch Receiver #C82ZV 100% will fit your 2024 Ford Ranger. I went ahead and confirmed this fit with Curt for you as well.

Yes, it will affect the kick sensor directly around the 2" receiver but you will still be able to utilize this function. You will just have to kick to the left or right and find where the EcoHitch item #EH97FR doesn't block…

The Bauer Products T-Handle Lock for Truck Caps #BA57VR comes with a J-327 key. So by ordering 3 of these they are all keyed alike. This particular handle is for locks rotating counterclockwise. We also have the Clockwise T-Handle #BA84VR if your…

I verified with Pop and Lock and the tail gate lock #PAL1700C is a fit for a 2011 GMC Canyon. We have not yet had the opportunity to install the lock on a vehicle so I do not have an installation video I can link you to. Installation is not…