Are Additional Springs or Mounting Brackets Needed for Solera Awning # LCV000231446  

Question:

Expert Reply:

Awning # LCV000231446 is the fabric and roll bar only but you would not need to add any additional springs. I spoke with my Solera contact and she said that with # LCV000231446 you will also need one of the following:

Manual hardware kit # LC434727 (requires 69" unobstructed from the awning rail down where it would mount. This also requires a minimum clearance of 2 1/2" from awning rail to top of entry door. These arms are a flat top and only pitch 3/4", however do have an auto dump feature (all awnings have this). The auto dump is when 10lbs of water is atop the awning, it auto dumps to prevent the fabric from sagging).

Manual hardware kit # LC351825 (requires 66 1/8" unobstructed from the awning rail down where it would mount. This also requires a minimum clearance of 11" from awning rail to top of entry door. These arms are an adjustable pitch and also have the auto dump feature).

expert reply by: Michael H

0