What Axle Does the Kodiak Disc Brake Kit # T4841400KIT Fit
Question:
I need to replace the brakes on my 2004 Procraft 180 Combo boat. The trailer is made by Trailstar and came with the boat. Currently it has TieDown G4 brakes on it. Will these be a straight bolt on?? Thanks
asked by: William O
0
Expert Reply:
If you have a 3,500 lb axle yes the Kodiak kit # K2HR35D will be a direct fit. If you check the plate near the coupler of the trailer that has the VIN and other info the axle capacities will be listed there.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Difference Between Kodiak 3,500 lb Hub & Rotor Disc Brakes
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Q&A: Replacement Disc Brakes for 2013 EZ Loader Adjustable Boat Trailer
- Q&A: What Trailer Tire Size is Most Similar in Diameter to 7-14.5 for Trailer
- Q&A: How to Convert Drum Brakes to Disc Brakes on a 2005 Boat Trailer
- Q&A: Recommendation for Replacing Torsion Axle on Ez Loader Boat Trailer
- Q&A: Recommendation on a Disc Brake Kit for a Trailer that has Drums Brakes
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs