Could White Wire of 4-Pole Trailer End Connector # 18004 Run to Two Different Spots
Question:
Hi there Could I attach the white wire on two spots to the trailer? In case, one goes bad. Thank you
asked by: JuiMing L
1
Helpful Expert Reply:
Yes, if you wanted to run the white ground wire of the 4-way part # 18004 to two different spots on your trailer frame you certainly could.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Draw-Tite
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Can 12 Volt Accessory Circuit of Trailer Wiring Keep 10 Amp Breakaway Battery Topped Off
- Q&A: 4-Way Trailer Connector that has 5 Wires
- Q&A: How to Splice in Replacement 4-Way Trailer End Connector
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between the Dexter DX7.5L A-60 Brake Actuators # DX83FR and # DX27FR?
- Article: Trailer Tire Sizing
- Q&A: Will 12V Wire at Vehicle End Trailer Connector Be Hot Even When Truck and All Lights Are Off
- Q&A: Should 12 Volt Hot Lead on 7-Way Trailer Connector Be Hot All the Time, WIll it Drain the Battery
- Q&A: Working Running Lights, But No Turn Signals or Brake Lights On Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Towing a Trailer? Let's Talk About Brake Controllers