Is Broken Zerk Fitting of Trailer EZ Lube Spindle a Problem
Question:
Anyone purchasing this axle spindle this year 2019 have the same looking grease zerk fitting as I have? Its a totally flat face with a small pin hole in the middle. Research shows it may be a type of button head zerk fitting. Im not sure how youre supposed to get a button head adapter in there to grease the thing though? Did I get a unicorn? Sales part of this ordeal has been great so far BTW....
asked by: Steve
Helpful Expert Reply:
Actually it looks like your spindle had a standard zerk fitting on it at one point and it was possibly removed on purpose or accident. We don't have a way to install a new one.
Honestly though you are better off without using this type of EZ lube setup. Repacking the bearings with grease by hand will give you the best results and won't risk you over-greasing the hub and blowing out the grease seal.
I have linked a video to the right that shows how to pack trailer bearings. Be sure to remove all of the old grease (and possibly the old zerk fitting), prior to reinstalling the bearings.
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Video: Review of Furrion Replacement Vision S Driver Side Marker Light and Bracket - FR66PR
- Q&A: Greasing Trailer Axle Spindle Where Zerk Fitting Broke Off
- Shop: RV Camera
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Shop: #42 E-Z Lube 4" Drop Spindle w/ Flange for 5.2K to 7K Trailer Axles - 3" Diameter
- Q&A: Correct Spindle Size for 2008 Triton Boat Trailer
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-219-4UC3 Review
- Search Results: axle nut
- Search Results: 85~1
- Shop: Tire Chains
- Search Results: 023 026 00
- Search Results: tc2327
- Search Results: tru74fr
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Replacement Trailer Hub Bearing - LM67048
- Q&A: What Exactly Does a 6 on 5-1/2 Inch Wheel Bolt Pattern Mean
- Q&A: What is the Correct Race for Use with Bearing # L68149?
- Q&A: Inside Diameters of the Bearings in Kit BK2-100
- Q&A: Inner Bearing to Brake Flange Dimension of # 84 Spindle TRU74FR
- Q&A: Flange Bolt Pattern and Distance From Flange To Rear Of #84 E-Z Lube Spindle TRU74FR
- Search Results: lippert axle
- Search Results: dexter axle grease caps
- Video: Inspecting and Packing Trailer Bearings with Grease Demonstration
- Shop: Wheel Cover
- Video: LubriMatic Wheel Bearing Grease Review
- Video: Review of Dexter Trailer Hubs and Drums - Pre-Greased 3500 LB - 84546UC3-EZ
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration