Hitch and Bike Rack Recommendation for 2020 Hyundai Ioniq  

Unfortunately, none of our hitch manufacturers offer a hitch that's compatible with the Hyundai Ioniq plug in hybrid. If you were needing the hitch to carry bikes, a trunk mounted bike rack like the Yakima Fullback #Y02634 2-bike or #Y02633 for…

Curt actually stopped requiring the stabilizer straps with their hitches like the #C11486 which fits your 2019 Hyundai Ioniq when using it with a non-supported load like a bike rack. You'd be totally fine to carry a 2 bike rack like the Thule T2…

The 2 inch hitch size is only available for vehicles with higher towing capacities like SUVs, trucks, and vans. Since your 2020 Hyundai Ioniq is a lighter duty vehicle you'd only have option of a 1-1/4 inch hitch like the Curt #C11486. I attached…

Sounds like you are trying to determine where the Curt hitch part #C11486 is going to sit when installed relative to the bumper of your vehicle. When we installed this hitch on a similar 2018 Hyundai Ioniq we found that from the center of the hitch…

Class I trailer hitch receivers like #24847 have a distance of about 1-5/8 inches from the center of the hitch pin hole to the welded stop in the back of the hitch receiver tube. Class I ball mounts like #3594 normally are about 1-9/16 inches from…

The only available hitches for a 2010 Toyota Prius have 1-1/4" receiver openings and are Class I rated. Class I racks are limited to carrying two bikes, though there are some that have an available adapter that allow bikes to be used with either…

According to my research the 2021 and 2022 model years for the Hyundai Ioniq are pretty much identical so both the Curt #C11486 and Draw-Tite #24963 Class I hitches will fit just fine on your 2022 model. We've actually had a few customers install…

The hitch options for the 2017 Hyundai Ioniq are Class I, 1-1/4" inch hitches. There is not a 2 inch receiver available because the Ioniq is not designed to handle the weight capacity of a 2 inch receiver. I recommend Draw-Tite hitch part #24963…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…