Replacement Idler Hub Needed for 3500 Pound Axle with 6 on 5-1/2 Bolt Pattern
Question:
I am looking for a hub w/o brakes to replace a damaged hub. The damaged hub is stamped with “QTP” and “84000”. I’ve not been able to find anything based on those markings, but the TRU77FR spindle has the same bearing dimensions as the hub I am replacing. I need a 6 bolt 5 1/2” pattern hub.
asked by: David F
Expert Reply:
If you are positive that your bearings have the same L68149 (1.378" inner diameter) inner bearing and the L44649 (1.063" inner diameter) outer bearing as the #84 EZ Lube Spindle # TRU77FR, we have what you need! You have a 3,500 pound capacity axle with idler hubs (thanks for the photos!)
For the hubs, I recommend the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 # AKIHUB-655-35-EZ-K. This comes with the same 6 on 5-1/2 pattern that you need. This is for a non-braking axle. I went ahead and attached a demo video that highlights all the parts included.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Trailer Spindles
- EZ Lube Spindle
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: Is Idler Hub With 6 on 5-1/2 Inch Bolt Pattern Available for 3500 lb Axle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Shop: Rack'Em Fitz-All Enclosed Trailer Ladder Rack
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Search Results: 34823
- Search Results: mcl95rb
- Video: Review of HE Parmer Trailer Fenders - No Step - HP69VR
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-EZ-1K Review
- Video: Review of Optronics Trailer Lights - Red LED Clearance Light or Side Marker Light - OPT53FR
- Shop: BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-3/4" Diameter
- Q&A: Are Load Resistors Required When Installing LED Lights on a Trailer
- Q&A: Will 14 inch Diameter Trailer Wheels Fit On Rim that is 5-1/2 inches Wide
- Search Results: bt8 spindle
- Search Results: spring seats
- Video: Optronics Trailer Lights A78CB Review
- Video: Review of HE Parmer Trailer Fenders - Steel Fender for 15 Inch Wheel - HP56VR
- Video: Review of Taskmaster Trailer Tires and Wheels - Wheel Only - TA75MR
- Video: Dexstar Tires and Wheels - Wheel Only - AM20365 Review
- Search Results: #84 spindle
- Search Results: brake magnets
- Q&A: Dimensions of Spindle # TRU77FR
- Q&A: What Size Axle Tube Will The #84 E-Z Lube Spindle w/ Brake Flange # TRU77FR Fit?
- Q&A: Availability of Hub That Fits TruRyde Replacement EZ Lube #84 Round Spindle
- Shop: Fifth Wheel Hitch
- Search Results: 1 inch castle nut
- Q&A: Non-Brake Hub that Fits #84 Trailer Spindle
- Shop: Trailer Wiring