Availability of Trailer Wheel Center Cap Kaper II A-C-425TT-KIT  

The Excalibur ST-104EZSS-60C is stainless steel and the Trailer Wheel Center Cap part #425EZ is chrome.

The inside height or depth of the Chrome Trailer Wheel Center Cap, item #425EZ, is 4-1/4 inches. The overall height of the Chrome Trailer Wheel Center Cap, item #425EZ, is 4-3/8 inches. I attached a review video for more info for you to check out as…

Thanks for the photo. It's hard to tell the exact outer diameter of the cap but I believe we do have options for you which I have attached below. Trailer Wheel Center Cap Plug - Chrome part #AM90082 (2-1/16" Outer Diameter) Trailer Wheel…

We do have a snap in plug for Lionshead trailer wheel center caps. The Snap-In Plug for Lionshead Trailer Wheel Center Caps - Chrome #LHSI60C will fit the following three models. #LHCS102, #LHCS108, #LHCS109. If you have one of these models then this…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…