Will the Pro Series Folding Trailer Hitch Mount Cargo Carrier Fit a 2014 Jeep Wrangler  

The specific one you referenced was discontinued a few years ago, but like you said we still have the 20x48 Pro Series Cargo Carrier #6502. This can fit 2 inch hitches and can fold up and out of the way when not needed.

I walked out to our warehouse and assembled the Draw-Tite Hitch Cargo Carrier, part #6502. From the top of the shank to the top edge of the carrier I measured 6-5/8 inches when the carrier is not folded up. Yes, you will be able to open the rear…

In order to determine if the Draw-Tite Cargo Carrier #6502 will fold up a single measurement is needed. That measurement is from the center of the hitch pin hole to the outermost edge of the bumper on your 2011 Toyota Sienna. I have attached a FAQ…

When the 20x48 Folding Cargo Carrier For 2 Trailer Hitch Receiver part #6502 - is folded up, you will have 7-1/2 inches of clearance from the center of the pin hole on your receiver to the edge of the carrier closest to your vehicle. Simply measure…

I have a couple of great hitch mount cargo carrier options for you, but we do not offer an aluminum carrier with a shank that has a rise. All of our aluminum carriers have a straight shank. One of our lighter weight options for a steel carrier with…

For a similar rack with better ground clearance than the Curt #C18110, I recommend the Pro Series #6502 for 2 inch hitches. For better ground clearance with the Curt #C18110, you would need a hitch adapter, like the #HT5R depending on your receiver…

If you do not want any noise or movement from your cargo carrier you'd want a fixed carrier. The folding ones will get on your nerves as they are just somewhat prone to movement. The Curt Aluminum Carrier part #C18113 would be your best…

You are correct the Draw-Tite Hitch Cargo Carrier, item #6502, could be removed from the shank that installs in the receiver with the proper tools. The best method I know of the secure the carrier and the parts on it is to use the Hollywood Racks…

The 2 inch receiver for the EcoHitch Hidden Front Mount Trailer Hitch #306-X7900 referenced in your question will actually protrude through the grille of your truck. This allows for a really clean appearance while also maintaining your existing…

You are correct that if your 2018 Ram 2500 has the factory tow hooks, they will need to be removed to install the EcoHitch Front Mount Trailer Hitch Receiver #306-X7900 but they will not be able to be reinstalled. With that said the #306-X7900 has…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…