Replacement Trailer Hubs, Wheels, And Tires For a Homemade Motorcycle Trailer
Question:
Hello, I have a home made motorcycle pull behind trailer in dire need of hubs, tires, and wheels. There are non taper spindles welded to the frame on each side. I would like to install 480/400-8 4 lug wheels and tires. Please send me a quote for three wheels with tires and two hub assemblies including all bearings, races and seals. 1. Spindle length = almost 4.25inch including 7/8inch threaded portion. 2. Spindle diameter = 0.99-1.0 3.
asked by: David B
Expert Reply:
Hey David,
Just to doublecheck I recommend measuring point B from the diagram below to see what your grease seal inner diameter is. If it's 1.25" and the inner diameter of the bearings is 1.00" then you would have a BT8 spindle and would be able to use the Trailer Idler Hub Assembly for 2,000-lb Axles # AKIHUB-440-2-1K that you were already looking at and the Kenda 4.80/4.00-8 Bias Trailer Tire # AM30000 for the wheels and tires.
Products Referenced in This Question
Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 4.80/4.00-8
- 8 Inch
- K - 65 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Q&A: Replacement 1/2-20 Wheel Stud For Reliable 1206 Trailer Hub
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Everchill Model WD-282FWDC-B-6 RC refrigerator
- Article: Most Popular Wheel Bearings
- Article: Rooftop Cargo Carriers
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Article: RV and Camper Types, RV Classes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Trailer Tire Sizing
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Article: How to Measure a Trailer Axle